DodgeTalk Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi, Thanks for the add!
Restoring my 98 Durango that sat for 7 years. Everything electrical was working, then yesterday morning I turned on the ignition switch to open the windows and no power to the driver's side console control, power locks out also, but the remote can activate them. The window fuse has continuity. I also have no starter circuit function. Everything else electrical is working normally. I am in the middle of replacing the shift solenoid in the tranny, but I don't think that could have anything to do with the starter circuit being dead. Something in the ignition switch? Any help is greatly appreciated!! Mopar or no car! Dave
 

·
Registered
Joined
·
2 Posts
I have a 98 that sat for a while as well. I assume you checked all the relays and fuses under the hood as well as the fuse box on the side of the dash.

Sent from my SM-N976V using Tapatalk
 
1 - 2 of 2 Posts
Top