DodgeTalk Forum banner
  • Enter for your chance to win a $50 Amazon Giftcard! HERE.
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
367 Posts
Yes, you have to cut out large holes in the frame body mounts to clear the long arms. Most people I know used a large hole saw.

It must be done, the arms clearly go through the cut outs.

The Cepek kit comes with reinforcement plates that bolt into the body mount, or you can have them welded in.

Never done the install, so I don't know how hard it is.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top