[Prism]

Hey guys; just got done putting this old rusty truck back together. I DID NOT use the preload spacers with the Zone 6" lift. I had Bilstein 5100 adjustable struts I wanted to use. I put them at the "1.34"" raised ride height setting. Do you guys think the cv angles are too steep? The truck is setting about 1/2" high in the front. Let me know what you all think.

 

[Prism]

Well I went ahead and made adjustments to the struts. I put them at the factory ride height setting and used the pre-load spacer that Zone provides. The cv angles are better.