DodgeTalk Forum banner

Status
Not open for further replies.
1 - 20 of 61 Posts

·
Banned
Joined
·
2,221 Posts
Discussion Starter #1
I talked to Crane cams and they're releasing the Crane 5.7 and 6.1 cam for our hemi!!!!

I'll have more info later today.
thanks,
bob
 

·
ASE approved
Joined
·
8,862 Posts
i want to know thespecs on these. and price if youcan i would like to know all the options that are avaliable for my customers. thanks mo your the greatest
 

·
Registered
Joined
·
1,652 Posts
Grind #1 Good w/ stock PCM
210/216
LSA 112

Grind #2 Nice to have PCM upgrade to run best, but not necessary
216/222
LSA 112

Grind #3 PCM upgrade required
222/228
LSA 114
 

·
HEMI way or no way
Joined
·
1,325 Posts
alright! i was hoping you could spoon feed me! hey man i am going to be home in alabama (Daphne/Mobile) this Thanksgiving.....how far away are you from that neck of the woods?
 

·
Registered
Joined
·
1,652 Posts
Crane Cams
Grind #1 Good w/ stock PCM
210/216
LSA 112

Grind #2 Nice to have PCM upgrade to run best, but not necessary
216/222
LSA 112

Grind #3 PCM upgrade required
222/228
LSA 114
Comp cams 260

208/212
LSA 113

Comp cams 268

216/220
LSA 113

Comp cams 273

224/228
LSA 114
 
Joined
·
2,395 Posts
**nm, i found the specs on the 268... so when it says pcm upgrade required, does that mean like a flash, or do you think we could make it work with the ARC1 or SMT-6?!?
 
Joined
·
2,395 Posts
hhmmm...maybe i should be one of the first, if not the first, to try this cam out and just use the ARC1!! well idk, im gonna wait and see how i feel after i have that 268 in my hands!! haha. anyword on prices yet...
 

·
Inertia ROCKS!!!!
Joined
·
12,164 Posts
This was posted over at DTW about the cams......
210/216 @ .050 duration .550/.550 vlv lift @ 112 lobe separation
216/222 @ .050 duration .550/.550 vlv lift @ 112 lobe separation
222/228 @ .050 duration .550/.550 vlv lift @ 114 lobe separation
 

·
All Around Great Guy
Joined
·
12,675 Posts
will they have the tuner they offer to gain the most from their cams?
 

·
Inertia ROCKS!!!!
Joined
·
12,164 Posts
The same guy that posted the cam specs posted the price....$468!!!
 
1 - 20 of 61 Posts
Status
Not open for further replies.
Top