DodgeTalk Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
358 Posts
Discussion Starter · #1 ·
ok guys i blow up my clutch in my 05 ram1500 4.7L 6spd.

I have replaced clutches before but never on a new style truck.
my number one thing i need to know is do i have to remove the torsion bar cross member to remove the transfer case. in order to pull the trans.

on my old dodge it had coil springs. so it was easy to pull the trans and transfer as one unit.
any help would be great. as im upgrading to center force stage 2 clutch.
and new flywheel, well im replacing everything to do with the clutch.

the funny thing is it blew when i was cruising at highway speeds and went to down shift, heard a loud bang and pedal went to the floor, the hyd system is good, as i replaced it thinking that blew out, but nope the release fork lever moves and nothing happens, so im thinking pressure plate or the throw out bearing snapped off the release for ears.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top