DodgeTalk Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
Has anybody had this problem.After cleaning the TB with cleaner I noticed that the accelarator pedal wouldnt move.How did this happen or how do I fix thr problem.
 

·
Registered
Joined
·
244 Posts
The rubber gasket on mine was not in right and while doing 76 mph on Southern State Parkway my pedal would not come back up...

Did you try to move the linkage at the throttle body???
Make sure your air cleaner box is on right and the linkage moves freely..

Post back your findings..
 

·
Registered
Joined
·
116 Posts
Take a look at the throttle cables you reinstalled. One of the cables routes below (under) the little black guide, you most likely have it over the top causing the problem described.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top