DodgeTalk Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter · #1 ·
Hey everyone,
I have got 3900mi on the truck so far and i have loved every second. But ever since i picked her up she has had a vibration in the dash at certain rpms. I think i have got it isolated to somewhere behind the Hvac controls. What is the best way to get to that part of the dash.?
Any help would be appreciated!
Thanks, Deck
 

·
Registered
Joined
·
4 Posts
do you have the console on the floor for drinks and such and 4 whl dr. shifter on the floor, if so hold the shifter with slight pressure when the vib. starts and see if it quits it may just be the boot,or somthing underneath,mine has the same slight problem.
 

·
Registered
Joined
·
126 Posts
The easiest thing is to take out the glove box. Open the glove box and squeeze the sides in and the glove box comes right out. You won't have much room and line of sight sucks but you may luck out and see something. Other than that you will need to pull trim. http://www.metraonline.com/_assets/manuals/INST99-6507.pdf has instructions for removal of the center bezel and radio which will get you to the area you want.
 

·
Registered
Joined
·
53 Posts
Discussion Starter · #4 ·
Thanks guys i will check tomorrow!
Deck
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top