DodgeTalk Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Ok I have a 2002 Ram 2500 Diesiel, I am looking at the instructions and it says to connect the Boost Pressure line to the pressure port on the engine? First of all Where is that? Next it says if you don't have that, you can remove one of the pressure pipes on the boost side of the turbo and drill a 5/16 hole and tap with a compression fitting? I am lost and could use some help, Come on guys let here what you think :gr_patrio
 

·
Registered
Joined
·
249 Posts
Bully Dog install

I love my Triple Dog, but the install instructions were less than helpful. The pictures were impossible to use for reference because they were so small and not very sharp. On the brighter side, the staff at Bully Dog was very helpful, and answered all the questions I had!
Bekim
###
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top