DodgeTalk Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter #1
Had new brake lines installed from the master cyl & ABS down to the frame. on the Ram 1500. I thought they might flush the system out while they were at it but it doesn't look like any of the bleeders were touched. It is a good feeling knowing the rusty ones are gone. I'll bet they were at least rusted half way through.
 

·
Registered
Joined
·
15 Posts
Did you replace the common one behind the gas tank?

We are a dodge family here and every one of our rams blew that line.

Rick
 

·
Registered
Joined
·
67 Posts
Discussion Starter #3
Did you replace the common one behind the gas tank?

We are a dodge family here and every one of our rams blew that line.

Rick
Yes, that was the first one to go. It actually blew out :mad:
 

·
johnnyjaws
Joined
·
33 Posts
how did they bleed it then?
 

·
Big Green
Joined
·
8,318 Posts
Mighty good question there and mine blew there too.
 

·
Registered
Joined
·
3,449 Posts
Mine blew out one block from the house. I used three ready made pieces of line from A-zone to replace it. That's been about three years ago.
:gr_patrio
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top