DodgeTalk Forum banner

Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
652 Posts
Discussion Starter #1
i just want to know the size bolts to put in the water pump pulley to keep it still while taking the fan clutch off? also what size nut is the fan clutch??? finally got my taurus efan in and wanting to install it next week, shroudless!!!!
 

·
Registered
Joined
·
4,029 Posts
i just want to know the size bolts to put in the water pump pulley to keep it still while taking the fan clutch off? also what size nut is the fan clutch??? finally got my taurus efan in and wanting to install it next week, shroudless!!!!
If you're looking to take the clutch fan off, that's not the way to do it. :huh:
 

·
ASE approved
Joined
·
8,862 Posts
I am going to guess. But 10 or 12MM.
guess again its more like a 36MM or something.


honestly just use a 18in crescent wrench. and you will be fine.
 

·
Got 2 Hemis
Joined
·
5,042 Posts
Best bet is to use a spanner on the pump pulley. Advance Auto Parts will usually rent you one. You can buy one for a bit more. It's a big honking nut alright. It's crescent wrench time.
 

·
Administrator
Joined
·
10,540 Posts
how did you all keep the pulley from turning is what i meant???????
Phillps screw driver stuck in one of the pulley holes and wedged against the water pump.
 

·
Registered
Joined
·
3,960 Posts
Don't use a screwdriver you don't want bent, mine bent pretty bad. Wedge the screwdriver in then get a hold of the nut with the crecent wrench and hit it with your palm, constant pressure is what mess up my driver. The impact of wacking it with your hand should break it free better. Or you could do it the right way with a spanner wrench, but what fun would that be.
 

·
ASE approved
Joined
·
8,862 Posts
why not just use a pices of bar stock with a bolt through it and make your own spanner wrench it will cost you $8 to buy everything needed to make a wrench. then you will have it to use over and over again. dont use a screwdriver!!!!!!!!!!!! you can break the gussets in the water pump housing if your not careful.
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top