Joined
·
79 Posts
Does anyone know of a source for a full bed liner for an 87 W150?
Bed Liner For 87
Join the discussion
Recommended Reading
-
Intake manifold gaskets
1972-1987 Dodge Ram Trucks (D, W-series)Got a set of tin looking intake manifold gaskets for my 1974 Dodge D100 318 2bbl. 3sp. Fel Pro MS90041-1. I read where alot of people prefer the comp style and i get that. But i am just running the stock intake at this time. Is there any reason why i should not use this gasket kit.?- 0
- 127
-
D100guy · updated
-
Timing (I hope!)
1972-1987 Dodge Ram Trucks (D, W-series)Hi guys, I’m working on my M880 (W200), I’m a complete novice at cars and trying to teach myself as I go, but I’ve come to a halt! I tried doing the timing a while back and noticed the light was bouncing around, so I’ve changed the timing chain, fitted a new Carter 2 barrel carb (stock...- 1
- 110
-
under dash plastic electrical wire connection
1972-1987 Dodge Ram Trucks (D, W-series)I have a 76 D100 and I have some questions about if anyone knows where or if the parts are obtainable. 1.) There is a couple of wires that come from an aftermarket ignition switch that have female bullet non insulated terminals and I want to know if anyone knows where to get the male bullet non...- 0
- 90
-
MrPD · updated
-
B300 Carburator Replacement
1972-1987 Dodge Ram Trucks (D, W-series)Dear Folks, first a frindly Hello! to all of you here, as this is my first posting. I am from Germany and not very good in tech-talk in english, but I hope some of you may help me in replacing the carburator of my van. I own an 1979 Dodge B 300 Van 5.2 ltrs that was formerly delivered to...- 5
- 170
-
Coil Springs Replacement
1972-1987 Dodge Ram Trucks (D, W-series)OK, so long story short. Driver side sagging 1.75 of an inch, that being said I know I need to replace coil springs. Need to know best way possible to do the job. Thanks in advance for any help ! JB- 6
- 431
Join now to ask and comment!