DodgeTalk Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
164 Posts
Discussion Starter #1
was going to see if anyone had a hookup for the rear air assit load bags. lookin to get the tank lines switches gauges tank and compressor. best price i got was around 650 for everything. any help would be appreciated.
 

·
Don't fear the sheepdog
Joined
·
6,404 Posts
Yup. I put the bags on, a dual needle pressure gauge (in an SRT-10 pillar), but no tank. I'm using a small compressor that plugs into the lighter to fill the bags. I just leave it in the tray behind my seat, and air up when I need to. Here's are links to the two how to's I wrote after I did it. The first is for the bags/plumbing, and the second is for the gauge/pillar.
http://www.dodgetalk.com/forums/showthread.php?t=111178
http://www.dodgetalk.com/forums/showthread.php?t=111162

If you want to do them with a compressor here's a link for that too.
http://store.summitracing.com/partdetail.asp?autofilter=1&part=FIP-2265&N=700+115&autoview=sku
You can get the airbags from $190-$230 at Summit Racing Equipment. If you get the bags, plus the "dual air comand" system in the above link, you'll be at $440-$480.

Good luck, I hope all this helped.
 

·
Don't fear the sheepdog
Joined
·
6,404 Posts
By the way. These things are GREAT!!!!!!!!
 

·
Registered
Joined
·
164 Posts
Discussion Starter #4
very cool thank you very much for the info looks like it will save me some coin.thanks again.
 

·
Don't fear the sheepdog
Joined
·
6,404 Posts
No problem.
If you have any questions along the way post it (or shoot me a PM if I don't reply). I keep my control panel pretty clean, so threads that go quiet I tend to unsubscribe to after a week or two.
 

·
MOPAR OR NO CAR
Joined
·
674 Posts
About 2 weeks ago I put on the air lift bag system and the smart air compressor system. The bags are awesome took about an 1 1/2 hours to install,,, really wasn't to hard. Just make sure you got really good cobalt drill bits. The tube style frame make the drilling twice as hard. The Smart air system is pretty good. It might over correct a little much. Just about every time I put something in the bed it compensates for it. I am very happy with the system though. You got any more question just ask,,,i got plenty more tips for the install...like having drill bits on hand!!!!
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top