DodgeTalk Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Devil's Advocate
Joined
·
8,224 Posts
Discussion Starter #1
Is there an aftermarket pan made for the 42rle? I've looked and some sites say that the pan that PML offers will not fit as it is a 14 bolt pan, and mine has 13? I'm not sure if it does or not, anyone know for sure, I havent had to time to go under the truck and look. Also has anyone added an external cooler, aftermarket or other? How big is the factory one that comes with the tow package? How is it mounted and how does it mount?
 

·
Devil's Advocate
Joined
·
8,224 Posts
Discussion Starter #3
that's a 14 bolt pan, mine is a 13 bolt. It's slightly different.
 

·
Private Assasin
Joined
·
1,198 Posts
Are you sure?

The 42Rx should be based directly off the A-500, which in turn is just an A-904 with an overdrive housing. I know 500s and 904s have the same pan.

It's the same with the 46R/47R/A-518 and 727 Torqflite...they all use the same pan pattern.

I'll check with a dealer buddy of mine who does a lot of trans work to verify.
 

·
Devil's Advocate
Joined
·
8,224 Posts
Discussion Starter #5
tell me what you find out, cause what I said about the bolt differences is what I keep hearing.
 

·
1baddak
Joined
·
433 Posts
I just went out and counted mine. Looks like 14 bolt count is right and thats for a A500 tranny which iam sure is the same as yours. I just put a deep pan on mine last week. Got one for a 904 worked great.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top