DodgeTalk Forum banner
Status
Not open for further replies.
1 - 20 of 33 Posts

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #1 ·

·
Ridin` Dirty
Joined
·
364 Posts
Looks interesting. Funny thing is, this place is probably 30 miles from me, lol.
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #3 ·
Its a nice cheap mod for power windows
 

·
I don't give a...........
Joined
·
1,360 Posts
Let me know how it goes, I've been looking for something like this for my truck. :rck:
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #5 ·
thecrapshoveler said:
Let me know how it goes, I've been looking for something like this for my truck. :rck:
Will do, I will take pictures and update this thread when I recieve them. Still no response and I bought them Saturday night.
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #6 ·
Update, Saturday I bought them and sent a Message to the Seller with my credit card info. I wrote him a message Monday morning to see if he had gotten it. Monday night I had gotten a reply that he said he would be sending it out. Nothing as of yet...
 

·
Don't fear the sheepdog
2021 Big Horn
Joined
·
6,400 Posts
I mainly want power locks, but I want to buy some stock door panels that have the switches in them. That way it has that OEM look. The problem is that, doing so requires me to install power windows too. If you could give us a write up when you do it (and lots of pics), I just might make the switch too.
I haven't had my door panels off yet, and I'm kinda worried that I won't be able to get to the window very easily to make the conversion, and I'm not sure if there are any wires in the door yet, so any tips that you pick up along the way would be great. If you do a write up, could you send me a PM when you do, so I don't miss it?
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #8 ·
Shots said:
I mainly want power locks, but I want to buy some stock door panels that have the switches in them. That way it has that OEM look. The problem is that, doing so requires me to install power windows too. If you could give us a write up when you do it (and lots of pics), I just might make the switch too.
I haven't had my door panels off yet, and I'm kinda worried that I won't be able to get to the window very easily to make the conversion, and I'm not sure if there are any wires in the door yet, so any tips that you pick up along the way would be great. If you do a write up, could you send me a PM when you do, so I don't miss it?
sure thing bro. I hope I run into no problems myself... I doubt it but you never know.
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #9 ·
Shots said:
I mainly want power locks, but I want to buy some stock door panels that have the switches in them. That way it has that OEM look. The problem is that, doing so requires me to install power windows too. If you could give us a write up when you do it (and lots of pics), I just might make the switch too.
I haven't had my door panels off yet, and I'm kinda worried that I won't be able to get to the window very easily to make the conversion, and I'm not sure if there are any wires in the door yet, so any tips that you pick up along the way would be great. If you do a write up, could you send me a PM when you do, so I don't miss it?
ok since you want to look OEM then I suggest this kit for you
You can simply cut into your original door panel and add these for a OEM look.
http://cgi.ebay.com/ebaymotors/POWE...emQQcategoryZ10076QQihZ003QQitemZ130031267686
Or you can pay a little more for the deluxe like the first set I posted which is what Im getting with a better window regulator.
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #11 ·
Well lets just say this is the longest Ive ever waited for anything on Ebay. It comes tomorrow and I will hopefully get it in this weekend because I cant start now due to fresh tint. I will write a how to and send PMs to those who asked.
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #13 ·
Lets just say the instructions arent all the best. Im glad my kit has the same colors or my ass woulda been lost. Ive been trying so hard for the past 3 hours to get as much as I can done. It seems to look like it mounts better in the newer f150s than it does dodges. Im thinking I might have someone install the rest after I run the wires. You have to do completely everything by scratch. Heres what I got done so far lol!!
 

Attachments

·
Infinite Lives
Joined
·
6,499 Posts
I gots to get me one of those.Except I would do what Shots says and use the factory buttons with the kit and avoid using those wierd lookin buttons.
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #15 ·
CRMRAM said:
I gots to get me one of those.Except I would do what Shots says and use the factory buttons with the kit and avoid using those wierd lookin buttons.
I was going to place them directly downwards similar to the OEM ones, but thats a lot to cut out and my holes arent the best with a blade LOL
 

·
Infinite Lives
Joined
·
6,499 Posts
maka said:
I was going to place them directly downwards similar to the OEM ones, but thats a lot to cut out and my holes arent the best with a blade LOL
One word for you......... BOB VILA!! :D
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #17 ·
CRMRAM said:
One word for you......... BOB VILA!! :D
thats 2... but knowing me, i would F it up so bad I would use some spackle to fill the holes, paint it black and stick with the cranks LOL
 

·
Infinite Lives
Joined
·
6,499 Posts
LOL my bad I saw it was 2 after I clicked 'Submit Reply"

My dealership offers this kit,they are asking 350 installed.Keep us posted on the install,I really wanna get this kit.
 

·
Yea, It's a Hemi
Joined
·
6,864 Posts
Discussion Starter · #19 ·
CRMRAM said:
LOL my bad I saw it was 2 after I clicked 'Submit Reply"

My dealership offers this kit,they are asking 350 installed.Keep us posted on the install,I really wanna get this kit.
350 is pretty damn good considering the headache Im getting. I cant find no damn PURE english instructions. You could tell it was made in Italy lol. I woulda thought you had power windows.
 

·
Infinite Lives
Joined
·
6,499 Posts
maka said:
350 is pretty damn good considering the headache Im getting. I cant find no damn PURE english instructions. You could tell it was made in Italy lol. I woulda thought you had power windows.
lol I wish I had power windows.my truck was also an ST when I first bought it.It was soo basic my bumper cover thing wasn't even painted :D
 
1 - 20 of 33 Posts
Status
Not open for further replies.
Top