DodgeTalk Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
400 Posts
Discussion Starter · #1 ·
I was looking at fabfours front bumpers and the one i want weighs 210 lbs. and then the warn winch i want for it is another 140 lbs. Ok i want to put this on a Ram 3500 4x4 QC SWB, I already have the cummins, and Before the bumper, Ill be putting a 6in superlift lift kit on. so im wondering how much 350 lbs is gonna make my front end droop. I was thinking about just adding 2in spaces, if it was gonna droop that much. ANY ideas, any helpful advice would be nice. thanks
 

·
Registered
Joined
·
400 Posts
Discussion Starter · #2 ·
Any Advice
 

·
Registered
Joined
·
1,698 Posts
Well the bumper I just bought from Buckstop weight's like 190 over the stock piece plus my warn m15,000 is anouther 145lbs or so. I's say your gonna have to install the bumper and just see how much you need. The lift will settle some 1/2"-1/4" Plus the added weight of the bumper odds are will drop it 1 1/2". You might need to get a leveling kit ontop of your 6" lift springs to level the front again. Unless you want a rake on the front like the factory setup.
 

·
WYOhemi
Joined
·
478 Posts
i wouldn't worry about it. when i put mine on it wasn't noticeable at all
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top