DodgeTalk Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Originating Member
Joined
·
35,160 Posts
Discussion Starter · #1 ·

Attachments

·
Do It In A Van
Joined
·
8,045 Posts
Where does the switch mount? Is there a blank on the dash or does it mount where the power window switches mount? I would pull the door panels off and see if the factory used a common harness. In other words, the power mirror connection may be taped up in the harness. If this is the case you could just plug your mirrors and switch in.
 

·
Do It In A Van
Joined
·
8,045 Posts
The factory probably just used a "blank off" panel that can be popped out. Hopefully the harness for the power mirrors is behind that door panel and is just taped off. Do you have a factory service manual for your van?
 

·
Registered
Joined
·
1,733 Posts
When Dodge Rams went from the chrome mirrors to that black plastic design, I seem to remember that quite a lot of the mirrors had loose parts that vibrated. Might want to double check the tightness of all connections before installing.

I myself have wondered if the mirrors off the PT Cruiser would bolt up in place of Van or pickup mirrors.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top