Thanks for all the :tup: . To answer a your questions. Bumper cover is made by Xenon called Cannonball Express from stylin concepts. The rims are 20X10 Gunner 5's (20X13,50X35 Mickey T's)from Discount Tire. The flames on the taillights I made. I bought a sheet of red decal vinyl, printed a picture of flames and made a template. As for the lift. The body lift is 3". The total lift consists of, 3" Performance Accesories body lift, 3 " Rough Country raised spindles, 2.5" Fabtech coil springs, and 2" RC blocks in back. With a set of Fabtech shocks. If you haven't already guessed, It is a 2wd. I fit 35s fine and could get 37s under there but would have to trim the bumpercover. Thanks again Heres a few more pics.