DodgeTalk Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
My 89 dodge aries has been missfiring lately so i cleared all the old codes and ran it today for awhile and the code that i got was code 34 speed control problem, but i have no idea what component to change or troubleshoot. any help is appreciated. thanks
 

·
Registered
Joined
·
10,824 Posts
more and likely it would be the speed sensor i would say. i am not positive on that though. hopefully somebody else will chime in. good luck
 

·
Aka Force Fed Mopar
Joined
·
6,120 Posts
It does, but the computer also reads it and does some calculations from it. Most commonly they tend to want to surge at idle, or stall when you come up to a light or stop sign. Code 34 is for the cruise though, not the speed sensor.

http://minimopar.knizefamily.net/fault/code34.html

Not sure how that would affect running though. Have you tuned it up recently? What kind of misfiring?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top