DodgeTalk Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
202 Posts
Discussion Starter #1
I have an 85 Ramcharger 4x2 318 that I picked up a few years back. I drove it for about 2 years then it has been sitting for about 2 years. I tried to start it about 6 months back, but it would just turn over and that was it. Before that it ran great, i drove it about 50 miles round trip to work and back during the winter. I removed the front brake pads last time I moved it becuase the pads were siezed to the rotors (to keep it from happening again). I have 2 newly reappoltered seats (one I already put in to replace the passenger side front seat). It does need some TLC, but would be a great parts truck or project.

I also have a freshly rebuilt engine (I think it is an 85 block - 318 w/ 289 swirl port heads) that was built for it (not by me) to replace the original 318 (which is still in it). The engine was a fresh block and all new parts except the intake manifold. It has a brand new oil pan, oil pickup and filter. New Black MOPAR ribbed valve covers. New Timing cover, water pump and many others..

The ramcharger does have a free and clear title....


I have not done much work to it in the last 2 years, but prior to that, I had the carb rebuilt, new cat installed, new plugs, and other misc stuff. Again, it has been sitting for 2 years, so it will need to be towed. It does have 1 flat tire (front right) from sitting.

I am looking for $800 for both the engine and the RC. I would be willing to seperate if someone really wants either, but would prefer to sell both together. Offers are welcomed though.

If I don't get any good offers, I will probably be junking it soon. I really don't want to junk it....

This would have to be picked up in Joliet, IL 60435 (It's about 30 miles south/southwest of Chicago)

I have newborn twins and don't have time (or money) for another project vehicle.

Please e-mail me @ [email protected] with any questions.








More pictures of the RC
http://www.mopar4life.com/pictures/ramcharger/8e_1.jpg
http://www.mopar4life.com/pictures/ramcharger/a0_1_b.jpg
http://www.mopar4life.com/pictures/ramcharger/c1_1.jpg

More pictures of the engine
http://www.mopar4life.com/pictures/ramcharger/DSC00835.jpg
http://www.mopar4life.com/pictures/ramcharger/DSC00836.jpg
http://www.mopar4life.com/pictures/ramcharger/DSC00837.jpg
http://www.mopar4life.com/pictures/ramcharger/DSC00839.jpg
http://www.mopar4life.com/pictures/ramcharger/DSC00841.jpg
http://www.mopar4life.com/pictures/ramcharger/DSC00842.jpg
http://www.mopar4life.com/pictures/ramcharger/DSC00843.jpg
http://www.mopar4life.com/pictures/ramcharger/DSC00844.jpg
http://www.mopar4life.com/pictures/ramcharger/DSC00845.jpg
http://www.mopar4life.com/pictures/ramcharger/DSC00879.jpg
 

·
Registered
Joined
·
202 Posts
Discussion Starter #2
bump.
 

·
Registered
Joined
·
28 Posts
Hello, I am in Metropolis,Ill., and even though Id like the rebuilt also, How much will you take for the RC. I have a 77 Warlock I am working on right now, and have a spare 318 ready to go. With the weather how it is right now I cant get there real soon. DONT JUNK IT, please send more closeup's and bit more info,like tilt,cc,ac,ect. you do have clear title right?
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top