DodgeTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 · (Edited)
I finally sold my Durango, so I am selling off the rest of the parts that I was planning to put into it:

318/360 Mopar Performance RT+10 cam (Part Number P5007551), less than 5k miles, Price $175

318/360 Edelbrock headers w/Y-pipe (Part number 66642) . Stainless steel and ceramic coated! Paid $450 + spent ~5 hours of porting on the flange side. It should fit all 97-99 V8 Dakotas/Durangos. Brand new! Price $350.



Mopar Performance PCM for 98-99 5.2 Durango 4x4, brand new. $250.

Viper brake upgrade project for 4x4 Durango/Dakota, about 40% done (will need to finish it!). Includes: 2 front Viper Calipers (Brembo), 4 rotors and partially modified 4x4 spindles. Price
$400 for the Viper calipers/rotors:


$250 for the partially modified spindles:



Or $600 for both, spindles and brakes

SOLD Sand blasted and ported “barrel” intake, runners reduced from ~12” down to ~10”.

Shipping is not included. I can take Pay Pal or personal check, but funds must clear before I ship the parts.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top