DodgeTalk Forum banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
could some let me know what is all invalved or all the parts i will need to replace the 4.7 in my 03 ram and replace it with a 5.7 hemi with M.D.S
Im capable of doing the work just don't know what i all need to do the whole job.

Thanks Brad
 

·
^GM Goodwrench Certified^
Joined
·
2,918 Posts
you need an engine, transmission, wiring harness, i think the radiator is different, PCM, TCM, Body controller, Dash harness, gas pedal assy., new drive shaft(s)


Id be cheaper just buying a new truck.
 

·
PAID OFF!!!
Joined
·
7,637 Posts
x2
 

·
Very Niiiice! :)
Joined
·
4,471 Posts
there is a yellow dakota that did a how-to on a 4.7 to a 5.7 hemi swap... forgot his name but I dont think there are too many dakotas running around with a hemi in their name/under the hood :D

-David
 

·
Administrator
Joined
·
10,540 Posts

·
Registered
Joined
·
380 Posts
there is a yellow dakota that did a how-to on a 4.7 to a 5.7 hemi swap... forgot his name but I dont think there are too many dakotas running around with a hemi in their name/under the hood :D

-David
Now that would be a fun little truck!!! :drivingz:
 

·
Administrator
Joined
·
10,540 Posts
Now that would be a fun little truck!!! :drivingz:
I wish I would have kept my old Dakota. It was a 2wd club cab 4.7L 5 speed. That would have been fun as hell with a Hemi.
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top