DodgeTalk Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 · (Edited)
I have a 1999 Dodge CTD 2500 QC 2WD. The front of the truck appears to be sagging, as the 265/75/16 rubber I have on there is rubbing on the plastic wheel well liners. I am considering installing a leveling kit, but would like some input from those who have done this. I measured from the ground to the top of the wheel arch; front I have 34" and rear 38". What size/brand of coil spacer would I need to get the vehicle level? A tad low in the front is ok, as I tow approximately 12,000lbs, on occasion.

Cheers!
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top