DodgeTalk Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a 1995 Dodge Avenger ES V6 which has the original hub bearing right on the other side of the passenger side's disk-rotor but the problem is that alot of rust is right on the backside AND frontside of the rotor making removal of the hub bearing impossible. Any recommendation on how to get all of the rust off so I can replace the hub wheel bearing?

Any help is appreciated!
 

·
Registered
Joined
·
2 Posts
The bearing and hub come as an assembly. You must remove the brake rotor and bracket. unbolt the axle and the hub comes off with 4 17mm bolts. Its real easy. It comes with the studs and bearing together. I removed the whole knuckle to make it easier.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top