DodgeTalk Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

· Registered
Joined
·
8 Posts
Discussion Starter · #1 · (Edited)
Hi gang. I'm not really a Dodge guy, a Yotaman actually. I'm trying to help my father get his car up and running for him. I am trying to replace /repair his
u-joints X 3 on his auto tranny, AWD, drive shaft. The dealer wanted $114 for each, usually around $25 and they only had one. I have been unable to remove two of them, due to the rust. The one I did get off seemed like it would be ok if I repacked it, so I don't want to use heat incase I have to reuse them all.

If someone has a source for the u-joints or a good part number that can be used for after market parts it would be appreciated. If not, any tips on how to remove those rusted spring clips, that have been soaking in WD-40 for four days, without damaging the u-joint or yoke would be welcome.

Sorry to put you through the ringer on the first post, but if you have any Yota Q's you're more than welcome to visit the Toyotanation.

Admin: Feel free to delete this post, as it been reposted in Intrepid talk. Thanks.
 

· Registered
Joined
·
8 Posts
Discussion Starter · #7 ·
Dodge 2000GTX and Mitsu Gallant
According to Kenny, it became the Intrepid. I tried to insert a link with pics, but was unable to get it to work. Try a search at Canadiandriver.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top