DodgeTalk Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a 1990 power ram 360 I'm working on that won't start. Plenty of fuel pressure and spark, will run if i put gas in carb. Seems like fuel injectors are not getting gas. Any ideas? Thanks
 

·
Do It In A Van
Joined
·
8,045 Posts
There is a relay on the firewall (somwhere) called the Auto-Shutdown Relay (ASD Relay). If this relay goes bad, the injectors won't fire.

Also check the wiring to the injectors and make sure the connectors are plugged in tight.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top