DodgeTalk Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all-- new to this forum. recent bought an old 1974 dodge motorhome with the MB300 model I believe. We are out searching for some new ilder arms and can't seem to find any. Does anyone have ideas where to look? Could we use the ilder arms from a different model- would they still work?
Any help would be great thanks!
 

·
Registered
Joined
·
3 Posts
Hey! Owner of a '72 B300. Sometimes, Sometimes you can get away with using a part from an earlier or later model. Doesn't hurt to take the part to Napa, Autozone, Advance, Oreilley's to see if they can match it. Sometimes the parts will have serial numbers on them (if you can get the rust off enough to read it). Sometimes you have to Frankenstein a part. Like for instance, my fuel sending unit. I had to make my own float because the part is obsolete as a whole. You can do it, pal. Patience, there's usually always something else to work on while you wait for parts.
 

·
Registered
Joined
·
312 Posts
Rock auto has them listed. Use CB300 as the model.

Moog 7106 or equivalent I believe.


"Talk is cheap. Whiskey costs money."
 
1 - 3 of 3 Posts
Top