DodgeTalk Forum banner

engine

  1. 1987 D-150 Needs more power sleeper

    Product Reviews
    I've had Vera since new in '87, she's a little dented but I love her. I've got about 435,000 miles on her 6 cylinder and am on my 3rd clutch in the 3SPD with OD. I really do not want a car payment so I am going to save about 6 months of what would be a $70,000 truck payment to do some work on...
  2. 318 Mild Perf. Engine Build

    1972-1987 Dodge Ram Trucks (D, W-series)
    Hey all, Man it's been a while since I've posted on here. Anyhow, I finally got some garage space, and found a guy down the street who sold me a 318 short block for $75, pretty good deal considering he delivered it to my house. I'm pretty sure it's a 68-69; we checked the bores and it has...
  3. 2001 Dodge Ram 1500 5.9 cylinder 1 misfire? P 0301

    2G Dodge RAM - General Talk
    I have a 2001 Dodge Ram 1500 with 187k miles on it, all original so she is old and things are prone to break. The other day (after whipping a donut in a snowy parking lot, don't lecture me :grin ) my check engine light came on. I did the little key trick and the code was P 0301. I googled it to...
  4. 318 Engine Question

    1972-1987 Dodge Ram Trucks (D, W-series)
    Resolved...... Bought the Vintage Air Bracket fit Great (162774). But...... It moves the Belt out a bit which requires a different Water pump Pulley and Crank Pulley. the Alternator is help by the Bracket so no change there. Origninal# alt Dodge # Vintage Air# 3698805 3462825 735006...
  5. Engine Swap Help

    3G Dodge RAM - General Talk
    Hello all, I bought a 2003 Dodge Ram 4.7 V8 as a project truck a few weeks ago which had a 2006 Ram 4.7 V8 installed into it, however the engine has never ran in the '03. After replacing the Cam and the Crank sensors I have come in conclusive to why the engine will not start. There is only one...
  6. strange hole in block near starter 360

    1972-1987 Dodge Ram Trucks (D, W-series)
    so I was under the truck yesterday checking out how the previous owner wired the electric fuel pump. While im down there im trying to identify where the oil leak is originating. It looks to be the pan gasket. Then I notice there is an open hole in the block between the oil pan and the...
  7. 340 short block

    For Sale - Car Parts
    For sale 340 short block + Block stamped 72, fully machined and magnafluxed before assembly. Bottom end consists of the following KB243 on stock rods and 69 forged crank fully balanced with summit SFI dampner. all rod and main bearing bolts are ARP. Cam shaft is Lunati voddoo 60403lk with...
  8. Engine Compatibility

    3G Dodge Ram Performance Talk
    Is a 2005 3.5 Magnum motor compatible with my 2002 3.7 Ram? My 3.7 ran hot, need to swap.
  9. Cam/crank position sensor codes: PCM flash needed?

    3G Dodge RAM - General Talk
    Hi, thanks for reading. I've searched, but can't post links yet :nerd Once I can post links I'll update OP ==> I'm curious if there's an answer since 2012 that avoids having to use a dealer to flash PCM CLOSEST POST: P0344 P0340 codes, mentions PCM needing a flash & the specific TSB...
  10. Feels like a miss fire?

    2G Dodge RAM - Drivetrain Talk
    I have a 97 Dodge Ram 1500 2wd with the 5.9. The truck has 141000 miles on it. When on the interstate going 60-70 mph I'll be keeping the same speed or going down hill with or without cruise on and in OD it feels like it misses but not all the time. If I give it more throttle it goes clears...
  11. High idle problems

    2G Dodge RAM - General Talk
    Hello! First time poster here, so please forgive me if I make any major mistakes about posting :) I have a 2001 ram 1500 with a 318 and 5 speed manual. We just replaced the engine about a thousand miles ago (block and both heads). The problem is that the truck idles high (about 1500 RPM) when...
  12. Cold start hard, fine when warm

    2G Dodge RAM - General Talk
    Hey all, Recently I got into my truck and cranked the ignition to go to work. to my suprise, it just cranked and didn't start right up like it always does. So then I turned the key to the "on" position 3 times and it started right up. Ever since then I have had to turn my key to the on position...
  13. engine & transition 2nd gen ram 5.9

    For Sale - Truck Parts
    how much is the average cost of a engine & transition for a 2nd generation ram 5.9?
  14. Engine Bay

    Engine Bay

    My 2005 Dodge Neon SRT-4 engine bay with a built engine and a Precision 6262SP turbo.
  15. Engine Bay

    Engine Bay

    My 2005 Dodge Neon SRT-4 engine bay with a built engine and a Precision 6262SP turbo.
  16. My Srt-4 Engine Rebuild

    My Srt-4 Engine Rebuild

  17. My Srt-4 Engine Rebuild

    My Srt-4 Engine Rebuild

  18. Engine

    Engine

    Right Side of Engine
  19. Engine

    Engine

    Left Side of Engine
  20. Poonkla's Intake

    Poonkla's Intake

    This is a view of my $50 intake from ebay. It works great! I love it, easy install.
Top