DodgeTalk Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Dodge Ram Truck 3rd Gen (02 – 08) Forums
    I've managed to at least separate my driver-side axle from the knuckle with the help of a 7-ton puller, but the inside is stuck to the intermediate shaft. So far I've tried: prying from multiple angles slide hammer rotating the axle and hammering again spraying the area with wd-40 I've been...
  2. 1972-1987 Dodge Ram Trucks (D, W-series)
    Hi everybody. I bought a 78 Power Wagon from a friend who bought it from a guy in Los Alamos. 53,000 on the clock but the speedo doesn't work so that's questionable. So, my friend was driving it back to his place when the rear end starting making a lot of noise and the truck became nearly...
  3. 2G Dodge RAM - Drivetrain Talk
    Im thinking about converting my Factory Stock Rear Differential (98 Dakota 3.9L V6 with manual 5 Speed. 3.93 rear ratio) to a Auburn Gear ECted Max Selectable Locker. I need to Know If my truck will have enough power to keep the tires spinning while the Diff is locked in mud and on steep climbs...
  4. d26

    I removed the spare tire to install a new valve stem in it and decided to take a shot of the axle/differential.
  5. d19

    Side view of the D parked up at work.
  6. d27

    I removed the spare tire to install a new valve stem in it and decided to take a shot of the axle/differential.
1-6 of 6 Results
Top