DodgeTalk Forum banner

360

  1. Too Much Vacuum? Bad timing? Help!

    1972-1987 Dodge Ram Trucks (D, W-series)
    Hello all, I am new to the forms, but I am Warlock's Dad's Son so the Truck has been on here a few times. We recently ditched the junked and blown 318 that came with the truck and built a new 360 with a junkyard 360 Magnum block out of a 250k mile Ram. This was supposed to be a budget build...
  2. 99 Misfire

    Dodge Dakota 2nd Gen (97 - 04) Forums
    About a week ago I started my truck up and it started misfiring; previous day ran fine. Codes P0300, P0306, and P0308. Changed the cap, rotor, plugs, wires, and coil. There are no vacuum leaks and the plenum is sealed with no oil in the intake. The misfire is most apparent at 40-55 MPH when it...
  3. Thoughts on 1st gen Ram w/ 360?

    Dodge Ram Truck 1st Gen (88 - 93) Forum
    I'm looking at an 85 Ram W150 with the 360 (gas), long bed, auto. How reliable are these trucks assuming they are in good shape and taken care of? Any major issues that might make it a dealbreaker as a daily? Are the torqueflites in these trucks solid? Thanks!
  4. 318 360 swap what should I know, 360 types?

    1972-1987 Dodge Ram Trucks (D, W-series)
    Hi all, I recently bought a 87 ram with a 360 in it but the body is shot. I am told the 360 only has 50k km on it and came out of a 84 motorhome. My plan is to swap out my non original 318 in my 85 D100 for the 360. What is the difference in 360 engines ( 360 , LA 360 , magnum 360)? How do I...
  5. Lil Red Express Exhaust Manifolds

    1972-1987 Dodge Ram Trucks (D, W-series)
    Hello, I am installing some new stock style exhaust manifolds onto my LRE. Both of the manifolds currently on the truck have 4041466 H stamped on them. I bought a pair of Dorman 674-233 manifolds off of Rock Auto. They have holes in the ends of the manifolds (See pictures). The ones on my...
  6. 340 short block

    For Sale - Car Parts
    For sale 340 short block + Block stamped 72, fully machined and magnafluxed before assembly. Bottom end consists of the following KB243 on stock rods and 69 forged crank fully balanced with summit SFI dampner. all rod and main bearing bolts are ARP. Cam shaft is Lunati voddoo 60403lk with...
  7. 2001 Durango R/t

    2001 Durango R/t

  8. 2001 Durango R/t

    2001 Durango R/t

  9. 2001 Durango R/t

    2001 Durango R/t

  10. 2001 Durango R/t

    2001 Durango R/t

  11. my 1976 prostreet Aspen

    my 1976 prostreet Aspen

    This has been sold. This was my 1976 Aspen prostreet. 360 with Dyer 6-71 blower. Fully tubbed, 8 point cage. 3:91 gears, 8-3/4 rear, fully street driven.
  12. R/T on 20 Inch Maxims.

    R/T on 20 Inch Maxims.

    R/T on 20" Maxim Wheels with 295/45zr/20 Pirelli Scorpion Zero Rubber.
Top