DodgeTalk Forum banner
RAM RODDER

RAM RODDER

3G RAM WEARING A XENON BODY KIT

·
Registered
Joined
·
37 Posts
hey man did you install the kit or did you have someone else do it? and if so was the running boards hard and the flares to put on?
 

·
Registered
Joined
·
3 Posts
I had a body shop paint and install the entire kit. The shop did a lousy job. I eventually had to put the front bumper on myself. It is not that hard if you have the patience and someone who is mechanically incline to help. The fender flares mount to the body with two sided tape which is not a problem as long as you clean the flares and use some good 3M tape, not the tape that comes with the kit. I watched the guy at the body shop put the running boards on. They were not that hard. If I could do it over, I would take off a week and put the entire kit on. I just did not have the time. Overall, I am happy with the kit, I just recommend if you are not going to do it yourself, take it too a good body shop that is familiar with XENON products. After you install the kit get ready for the stares! Your ram will be pumped. I plan on putting some chrome around the edge of the flares. Take care.
 

Media information

Category
Ram Truck - 3rd Gen (2002-08) Gallery
Added by
darrylwright
Date added
View count
816
Comment count
2
Rating
0.00 star(s) 0 ratings

Share this media

Top