New project - DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
Reply
 
Thread Tools
post #1 of 68 Old 06-14-2009, 12:17 AM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Talking New project

OK, I got a drawing and some 1.5" OD, .120" wall DOM tubing. And a trip to the tube bender on Monday. I wanted to do this before Moab, but didn't have the cash on hand because of Moab. Since I didn't go, and now I got cash. I decided to go ahead with this project.

I also have another project waiting to go, but my parts didn't come in yet. I'll keep yinz posted.
Attached Images
File Type: jpg Nerf bar.jpg (626.7 KB, 75 views)
File Type: jpg DSCN0741.JPG (173.5 KB, 40 views)

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
Quote Quick Reply
Sponsored Links
Advertisement
 
post #2 of 68 Old 06-14-2009, 08:46 AM
RAM MAN
Originating Member
 
RAM MAN's Avatar
 
Join Date: Jan 2002
Location: Haslett
Posts: 35,160
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
protection for the bottom of the truck ?




Quote:
Good luck on your project.
RAM MAN is offline  
post #3 of 68 Old 06-14-2009, 10:22 AM
TwinStick
Senior Member
 
Join Date: May 2008
Posts: 9,006
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Bumper or Rock Sliders ???

08' PowerWagon w/6-speed manual G-56. 05' 30' toyhauler camper.(10,500lbs)
Hellwig LoadPro 35 bolt on 4 leaf helper springs.
No honey, I'm NOT done buying shit for the truck yet !!!
PurpleCrainium Diff Guards
K&N air filter --- WeatherGuard 20" black bed toolbox.
winch TPC bypass
Dual battery set up w/2 Sears DieHard Platinums-Gp 65 under hood-Gp 31 Marine deep cycle in bed toolbox w/plug-n-play set up. Custom 2000/4000w inverter set up w/quick connect. Triple bike mounts above the bed- custom made by me.
Crapload of recovery gear-always subject to adding more.
Fab Four rear bumper. Soon to be- a BuckStop Baja front bumper.--Temporarily on hold, see reason below.
Installed: Borgeson #000951 steering shaft. PSC steering brace(notched for PW by Rusty-thanks bud). Carli HD CroMo adjustable track bar. Carli CroMo control arms. Carli HD upper & lower balljoints x 2 sets (replaced under warrenty) & triple sealed u-joints in front axle shafts & rear driveshaft. Moog HD tierod ends x 4. Running total is now $4800. Yup, now i'm broke !!!


What, you ask, is the difference between a Dodge Ram and a PowerWagon ?? PW frame part # 55398868AC---Reg 2500 #55398813AC
About 2" taller, 12,000lb winch w/mounting brace between framerails,electronic disconnecting swaybar(for awsome articulation),electronic locking axles front & rear(for true 4-wheel drive),tow pkg, fully skidplated,forged one piece Alcoa rims w/internal beadlock lips,larger diameter(one ton) axleshaft in rear,160 amp alt,HD battery,4.56 gears,low range electronic recalibration of gas pedal sensitivity,more but thinner leafs in rear spring pack(for better articulation), 33" BFG All-Terrain tires. 78.016:1 crawl ratio. All for $6100.00 more! Oh yeah, almost forgot-Bilstein shocks. Gear ratios: 1st 6.29:1 2nd 3.48:1 3rd 2.10:1 4th 1.38:1 5th 1.0:1 6th .79:1.. Rev 5.74:1.
TwinStick is offline  
Sponsored Links
Advertisement
 
post #4 of 68 Old 06-14-2009, 10:43 AM
powderwagon
Registered User
 
powderwagon's Avatar
 
Join Date: Nov 2007
Posts: 441
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Sweet looking idea for rock rails... Definately keep the updates going.

2006 Powerwagon QC
Patriot Blue
A.R.E Shell
Smoked Clearance Lights
Yakima in-track Ski Rack
EZ-Down Tailgate assist
35" Toyo m/t...Siped
powderwagon is offline  
post #5 of 68 Old 06-14-2009, 03:44 PM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Talking

Look in my sign for an idea.

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
post #6 of 68 Old 06-15-2009, 12:04 AM
OCEAN
Registered User
 
OCEAN's Avatar
 
Join Date: Jan 2008
Posts: 430
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
your garage is way cleaner than mine!
OCEAN is offline  
post #7 of 68 Old 06-15-2009, 02:18 PM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Quote:
Originally Posted by OCEAN View Post
your garage is way cleaner than mine!
The only thing that get parked in the garage is the bikes. The garage door is only 6ft high. The garage became my work shop with a large outside door. LOL The floor is getting all chipped up from the kick stand on the bikes. And it's only 3 years old. 2 part epoxy mix.

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
post #8 of 68 Old 06-23-2009, 10:45 AM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Talking Up date

OK, I got the tubing bent. I wanted 60deg bends. The guy I took the tubing to, said that he could do it. Since he does rollcages. I got a call from him. Said he can't bend it to 60deg without kinking. So I ended up with 45 deg bends. He said that the thickest DOM tubing he has bent is .090. He's never try .120. Now he has. I fitted and tack welded everything at home, and drove to work so that I could tig weld everything up. Talk about a LLOONNGG day. I still have to paint them yet. I believe now that I can pick the PW up with a High Lift jack using the nerf bars. Enjoy the
Attached Images
File Type: jpg DSCN0744.JPG (179.4 KB, 32 views)
File Type: jpg DSCN0745.JPG (181.4 KB, 27 views)
File Type: jpg DSCN0746.JPG (166.6 KB, 24 views)
File Type: jpg DSCN0747.JPG (173.2 KB, 23 views)
File Type: jpg DSCN0748.JPG (168.7 KB, 21 views)
File Type: jpg DSCN0749.JPG (169.4 KB, 24 views)

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
post #9 of 68 Old 06-23-2009, 10:50 AM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Talking More pic's

More
Attached Images
File Type: jpg DSCN0750.JPG (170.6 KB, 19 views)
File Type: jpg DSCN0751.JPG (179.9 KB, 17 views)
File Type: jpg DSCN0752.JPG (167.4 KB, 17 views)
File Type: jpg DSCN0753.JPG (170.3 KB, 16 views)
File Type: jpg DSCN0754.JPG (155.9 KB, 16 views)
File Type: jpg DSCN0755.JPG (154.0 KB, 19 views)
File Type: jpg DSCN0756.JPG (178.7 KB, 14 views)
File Type: jpg DSCN0757.JPG (170.5 KB, 14 views)

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
post #10 of 68 Old 06-23-2009, 10:57 AM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Talking

For sale. A pair of Carr side steps for rock rails.

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
post #11 of 68 Old 06-23-2009, 01:17 PM
danny.p.watts
RedMan
 
danny.p.watts's Avatar
 
Join Date: Jan 2008
Location: Camp Lejeune
Posts: 2,487
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Send a message via MSN to danny.p.watts
Quote:
Originally Posted by RustyPW08 View Post
More
Nice job with the welds , I am looking to do the same thing, how much did you pay for the metal? If you don't mind giving up that info.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Power Wagon Registry #47
- SCT Tuner by
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

- front and rear rock ready bumpers (hand made out of 1/4" wall 4X6 tubing)
- Thuren suspension and steering upgrade (springs, shocks, shackles, and heim joints)
- stock 4gen tires (for now)_- Snorkel
- Rock Rails_____________________- CB Radio
- RockCrusher Front Diff Cover_____- Tool box and all necessary tools
- diff locker by-pass_____________ - Flow Mast Series 40 Dual Exhaust
- Illuminated Ram Hood Emblem_____- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_____- Power Wagon Winch Strap
- Solar Battery Maintainer_________-
- Hide-Away Gun rack_____________- 4 Off road lights

Wife's ride "Faith" 2014 Charger RT Max
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
danny.p.watts is offline  
post #12 of 68 Old 06-23-2009, 01:38 PM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Talking

Quote:
Originally Posted by danny.p.watts View Post
Nice job with the welds , I am looking to do the same thing, how much did you pay for the metal? If you don't mind giving up that info.
Thanks. I got the DOM tubing from Metal Depot. 2, 10ft pieces and 1, 4ft piece was $229 with shipping. Had the be shipped by freight. Too long for UPS. Didn't need the 4ft piece. Now I got a nice cheater bar.

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
post #13 of 68 Old 06-23-2009, 01:42 PM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Talking More pic's

More
Attached Images
File Type: jpg DSCN0758.JPG (171.8 KB, 14 views)
File Type: jpg DSCN0759.JPG (150.5 KB, 14 views)
File Type: jpg DSCN0760.JPG (161.9 KB, 16 views)
File Type: jpg DSCN0761.JPG (171.8 KB, 13 views)
File Type: jpg DSCN0762.JPG (171.9 KB, 17 views)
File Type: jpg DSCN0763.JPG (164.2 KB, 16 views)
File Type: jpg DSCN0764.JPG (171.0 KB, 21 views)
File Type: jpg DSCN0765.JPG (174.0 KB, 19 views)

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
post #14 of 68 Old 06-23-2009, 02:56 PM
powderwagon
Registered User
 
powderwagon's Avatar
 
Join Date: Nov 2007
Posts: 441
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
ooooohhhhh, that's damn good looking. Nice work. Now let's see a pic of it being used with a high-lift jack and drug over some rocks

2006 Powerwagon QC
Patriot Blue
A.R.E Shell
Smoked Clearance Lights
Yakima in-track Ski Rack
EZ-Down Tailgate assist
35" Toyo m/t...Siped
powderwagon is offline  
post #15 of 68 Old 06-23-2009, 03:18 PM
SchroederMP
living life
 
SchroederMP's Avatar
 
Join Date: Apr 2009
Location: Columbus
Posts: 6,909
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Send a message via Yahoo to SchroederMP
Looks professional man! Great job! Def looks great on your wagon!

2005 CTD 4x4-5" Turbo back exhaust, Icebox CAI, Smarty, AirDog, built tranny, leveled, Linex Rockers


1993 Dodge Stealth 3.0L 5sp-Project/Gas Saver



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SchroederMP is offline  
post #16 of 68 Old 06-23-2009, 05:51 PM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Talking

Quote:
Originally Posted by powderwagon View Post
ooooohhhhh, that's damn good looking. Nice work. Now let's see a pic of it being used with a high-lift jack and drug over some rocks
I don't have to worry about shopping carts hitting it, and somebody openning doors on it. When I'm mall crawling. LOL

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
post #17 of 68 Old 06-23-2009, 06:52 PM
tmthunder
Registered User
 
tmthunder's Avatar
 
Join Date: Sep 2005
Posts: 335
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Russ that looks awesome! Great job. Might have to look into doing that if I end up working with you in the near future again.

2010 Plum Crazy SRT8 Challenger Loaded, Hurst shifted 6-speed, CAI, Strut Tower Brace, Predator tuned, 180T-stat
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2005 QC Power Wagon Silver Metalic loaded.
MAC CAI, SRT-10 A-Pillar w/ISSPRO Trans temp, 315/70/17 BFG KO's on H2 wheels, Rock Rails, Power Wagon Winch kit, KC Daylighters behind the grill, Back Rack, Magnaflow Y-pipe and MagnaPak muffler, Predator tuned
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
tmthunder is offline  
post #18 of 68 Old 06-23-2009, 07:06 PM
crash1369
我愛貓
 
crash1369's Avatar
 
Join Date: Dec 2007
Location: Tobyharlem
Posts: 7,864
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
those are nice, i think the 45 bends are probably better then 60 anyway. they look good like that and I think it will help repel and surprises better


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

"At no point during your rambling, incoherent response did you ever come close to anything that could be considered a rational thought. We are all now dumber for having listened to it. I award you no points, and may god have mercy on your soul."

crash1369 is offline  
post #19 of 68 Old 06-23-2009, 07:33 PM Thread Starter
RustyPW08
Moab Tested
 
RustyPW08's Avatar
 
Join Date: Feb 2008
Location: Brownsville
Posts: 7,252
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Talking

Quote:
Originally Posted by tmthunder View Post
Russ that looks awesome! Great job. Might have to look into doing that if I end up working with you in the near future again.
I charge by the beer! LOL I got a"FEW" hours in this. You figure, there is 20 joint welds. I did the tig welding in the shop if those pic's look familiar. LOL
Hey, you want to buy a power plant? LOL We're up for sale. They won't tell us who the 3 bidders are. Management (Bill) told us we are going to know this week if we are sold or not. LOL

PWOC #53
2008 POWER WAGON RC
Sequentially Number #08-1505,
Inferno Red, Automatic
Mods to the PW;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Extang Tonneau Cover, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, Had 35" Cooper STT's now 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper, PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, BIG Pul-Pal and it's own body bag!, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, MORE STUFF COMIN', TTI headers, Somebody's long arm, 7.2L MOTOR
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
,
Mods to me; Ti hip replacement. Zerk fitting in knee. Now it's gets greased more than some guys front drive shafts. I've been Used, Abused and Recycled!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Survivor of The Cold War,
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Heaven's Gate, The Grand Conjunction, The Pleiadeans Landings, Y2K, The Winch Mob Banning, The Mayan Apocalypse, and some other covert stuff. Future ISIS killer!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Moab '10, '12, '14",
"Rausch Creek-Spring, Fall '11, Spring '12, Summer '13, Summer '14"


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


RUSS
RustyPW08 is offline  
post #20 of 68 Old 06-23-2009, 10:40 PM
TwinStick
Senior Member
 
Join Date: May 2008
Posts: 9,006
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Looks awsome. Great job. I think the 45 deg bends are better, as things will slide around them better, than a 60 deg bend.
That is exactly what I was thinking of doing when money and time allow.

08' PowerWagon w/6-speed manual G-56. 05' 30' toyhauler camper.(10,500lbs)
Hellwig LoadPro 35 bolt on 4 leaf helper springs.
No honey, I'm NOT done buying shit for the truck yet !!!
PurpleCrainium Diff Guards
K&N air filter --- WeatherGuard 20" black bed toolbox.
winch TPC bypass
Dual battery set up w/2 Sears DieHard Platinums-Gp 65 under hood-Gp 31 Marine deep cycle in bed toolbox w/plug-n-play set up. Custom 2000/4000w inverter set up w/quick connect. Triple bike mounts above the bed- custom made by me.
Crapload of recovery gear-always subject to adding more.
Fab Four rear bumper. Soon to be- a BuckStop Baja front bumper.--Temporarily on hold, see reason below.
Installed: Borgeson #000951 steering shaft. PSC steering brace(notched for PW by Rusty-thanks bud). Carli HD CroMo adjustable track bar. Carli CroMo control arms. Carli HD upper & lower balljoints x 2 sets (replaced under warrenty) & triple sealed u-joints in front axle shafts & rear driveshaft. Moog HD tierod ends x 4. Running total is now $4800. Yup, now i'm broke !!!


What, you ask, is the difference between a Dodge Ram and a PowerWagon ?? PW frame part # 55398868AC---Reg 2500 #55398813AC
About 2" taller, 12,000lb winch w/mounting brace between framerails,electronic disconnecting swaybar(for awsome articulation),electronic locking axles front & rear(for true 4-wheel drive),tow pkg, fully skidplated,forged one piece Alcoa rims w/internal beadlock lips,larger diameter(one ton) axleshaft in rear,160 amp alt,HD battery,4.56 gears,low range electronic recalibration of gas pedal sensitivity,more but thinner leafs in rear spring pack(for better articulation), 33" BFG All-Terrain tires. 78.016:1 crawl ratio. All for $6100.00 more! Oh yeah, almost forgot-Bilstein shocks. Gear ratios: 1st 6.29:1 2nd 3.48:1 3rd 2.10:1 4th 1.38:1 5th 1.0:1 6th .79:1.. Rev 5.74:1.
TwinStick is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to use most of our features, you must first register.
Please enter your desired User Name, your Email Address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
The registration process requires you to activate your membership by following a link in an E-Mail that will be sent to you immediately upon completing this form. You must enter a valid email address or you will not receive this activation code and you will NOT be registered. Your E-Mail address is NOT publicly available to anyone as policy.

AOL E-MAIL USERS: Please click HERE for important info pertaining to your e-mail address.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New Project Jcturner03 2G Dodge RAM - 4X4 Talk 8 01-26-2009 01:22 PM
My new project Lmopar69 1918-1947 Dodge Trucks 4 08-19-2008 10:49 PM
New Project lordfeyr 3G Dodge RAM - General Talk 78 03-24-2008 03:20 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome