Got a DYNO!! - DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
Closed Thread
 
Thread Tools
post #1 of 14 Old 06-24-2011, 10:02 AM Thread Starter
sinus19
Registered User
 
sinus19's Avatar
 
Join Date: Jul 2010
Posts: 60
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Got a DYNO!!

so i finally got my complete exhaust inn 3" pacesetters LTs>3" y-pipes>2.5ft of 3" streight pipe>3" SI/2.5DO Flowmaster super 10 dumped with 14" turn downs.
After 28 painfulls hrs and some chopping and grinding, i was able to install the exhaust. The headers whent in easy on the left side but on the right i had to unbolt the fuse box, remove the plastice tire fender to get to the battery tray and remove it, remove the power steering resorvoir (or just the whole unit) and remove all spark plug wires and guide/protective round plates. and for the record; pacesetter's y-pipe on a 02 dodge ram 4X4 does not fit propaly! some series modifications have to be done. The y-pipe/collector is too big. it lands up right in between the cross member/brace that holds the torsion keys and the flooring support, I had to cut a piece off flooring. I also had to cut one of the pipes 1.5" shorter in order to be able to fit it all in





Today i wen to ISU (idaho State Univ.) to register because i will be moving out this augost. A day prior i made an appointmen with a Dyno shop which was 2 streets away (even though ISU has a Dyno for their automotive program) anyways here a short vid of the dyno with all of my mods on my signature!!



Blue is 3rd gear pull
Red is 35mph pull
Green is through all gears (starting from 1st)

Current Mods- SCT by Hemifever on 93oct, E-Fan, 185 T-stat, TB Mod, 3" pacesetters LT Headers and 3" Y-pipe to a 3" SI/DU 2.5 Flowmaster super 10 dumped with turn downs before axle, Power wire, Hughes FI Air gap Intake mani. 4.56 gearing and a Detroit LSD.
To do- Cam, or 408!
sinus19 is offline  
Quick Reply
Sponsored Links
Advertisement
 
post #2 of 14 Old 06-24-2011, 02:56 PM
Woodstock
Woodstock
 
Woodstock's Avatar
 
Join Date: Jan 2008
Location: Eidson
Posts: 762
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Impressive. Those pipes sure look good. The 'Y' pipe difference is amazing. That Flowmaster is barely a muffler at all.

2000 1500 Sport 5.9 4X4 QC 46re w/TFODjr
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SCT by hemifever, 4.10 Gears, Stainless Steel Headers
HellBent Steel leveling kit, 33X12.50X16 Super Swamper TSL Radials
1985 350 Custom Dually 360ci 4barrel 727
1990 Jeep YJ 4.2
Woodstock is offline  
post #3 of 14 Old 06-24-2011, 03:35 PM Thread Starter
sinus19
Registered User
 
sinus19's Avatar
 
Join Date: Jul 2010
Posts: 60
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
LOL!! yea i can hardly hear the flowmaster's tone!!

Current Mods- SCT by Hemifever on 93oct, E-Fan, 185 T-stat, TB Mod, 3" pacesetters LT Headers and 3" Y-pipe to a 3" SI/DU 2.5 Flowmaster super 10 dumped with turn downs before axle, Power wire, Hughes FI Air gap Intake mani. 4.56 gearing and a Detroit LSD.
To do- Cam, or 408!
sinus19 is offline  
Sponsored Links
Advertisement
 
post #4 of 14 Old 06-24-2011, 03:50 PM
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
congrates on the LT's and clean looking truck...nice #s on the 3rd gear pull(1-1)....is that with the hughes air gap or a modded kegger?...updated list of mods...what were your air/fuel ratios at(how close was hemi with the tune lol)?....my last dyno my ratios were in the 10's....not good for making hp/torque....

edit...were u go?...

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE

Last edited by DODGEPICKUP; 06-24-2011 at 04:17 PM.
DODGEPICKUP is offline  
post #5 of 14 Old 06-24-2011, 06:24 PM Thread Starter
sinus19
Registered User
 
sinus19's Avatar
 
Join Date: Jul 2010
Posts: 60
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Quote:
Originally Posted by DODGEPICKUP View Post
congrates on the LT's and clean looking truck...nice #s on the 3rd gear pull(1-1)....is that with the hughes air gap or a modded kegger?...updated list of mods...what were your air/fuel ratios at(how close was hemi with the tune lol)?....my last dyno my ratios were in the 10's....not good for making hp/torque....

edit...were u go?...
thanks man, it was with both hughes intake and stock kegger. what really got me was that his air/fuel gauge was not working right Hemifever needs those numbers for a retune.

Current Mods- SCT by Hemifever on 93oct, E-Fan, 185 T-stat, TB Mod, 3" pacesetters LT Headers and 3" Y-pipe to a 3" SI/DU 2.5 Flowmaster super 10 dumped with turn downs before axle, Power wire, Hughes FI Air gap Intake mani. 4.56 gearing and a Detroit LSD.
To do- Cam, or 408!
sinus19 is offline  
post #6 of 14 Old 07-11-2011, 09:27 PM
sharkie
05 srt-10
 
sharkie's Avatar
 
Join Date: May 2006
Location: HOUSTON
Posts: 498
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
where did you buy the long tubes and exhaust from

2016 Lone-star edition 2500 4x4 6.7
2005 SRT-10 Comemeritve Edition #15

2005 srt-10 Black R/C:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
sold
sharkie is offline  
post #7 of 14 Old 07-11-2011, 11:13 PM Thread Starter
sinus19
Registered User
 
sinus19's Avatar
 
Join Date: Jul 2010
Posts: 60
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
I got everything from Summit

Current Mods- SCT by Hemifever on 93oct, E-Fan, 185 T-stat, TB Mod, 3" pacesetters LT Headers and 3" Y-pipe to a 3" SI/DU 2.5 Flowmaster super 10 dumped with turn downs before axle, Power wire, Hughes FI Air gap Intake mani. 4.56 gearing and a Detroit LSD.
To do- Cam, or 408!
sinus19 is offline  
post #8 of 14 Old 08-19-2011, 03:05 PM
rcamp191
Campbell
 
rcamp191's Avatar
 
Join Date: Aug 2011
Location: Bucks County
Posts: 92
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
very nice i am running a very simialar setup for the exhaust i have long tubes and the y pipe at home and will install them soon. how hard was it to install and what did you also have to buy to make them fit properly and are you running a cat on your truck

Jasper 5.9 285 hp 390 ft pounds of torque, Custom exhaust with 10 series, volant cai, holley throttle body, long tubes, high flow cat, sct tuner 93 octane tune
rcamp191 is offline  
post #9 of 14 Old 08-19-2011, 03:32 PM Thread Starter
sinus19
Registered User
 
sinus19's Avatar
 
Join Date: Jul 2010
Posts: 60
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Quote:
Originally Posted by rcamp191 View Post
very nice i am running a very simialar setup for the exhaust i have long tubes and the y pipe at home and will install them soon. how hard was it to install and what did you also have to buy to make them fit properly and are you running a cat on your truck
what year is your truck? 4x4?

Current Mods- SCT by Hemifever on 93oct, E-Fan, 185 T-stat, TB Mod, 3" pacesetters LT Headers and 3" Y-pipe to a 3" SI/DU 2.5 Flowmaster super 10 dumped with turn downs before axle, Power wire, Hughes FI Air gap Intake mani. 4.56 gearing and a Detroit LSD.
To do- Cam, or 408!
sinus19 is offline  
post #10 of 14 Old 08-19-2011, 07:15 PM
rcamp191
Campbell
 
rcamp191's Avatar
 
Join Date: Aug 2011
Location: Bucks County
Posts: 92
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
97 sport st/sb 4x4 with 3.55 gears ihave 265/75/16 duratracs on it right now with nothing done and it already sounds mean i cant wait till i get the long tubes on

Jasper 5.9 285 hp 390 ft pounds of torque, Custom exhaust with 10 series, volant cai, holley throttle body, long tubes, high flow cat, sct tuner 93 octane tune
rcamp191 is offline  
post #11 of 14 Old 08-19-2011, 09:52 PM
Ricker97ram
Registered User
 
Join Date: Mar 2009
Location: Western NY
Posts: 756
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Great torque #'s, especially the green
Ricker97ram is offline  
post #12 of 14 Old 08-20-2011, 09:52 AM
Ram.Sport.02
DOGOS RULE!
 
Ram.Sport.02's Avatar
 
Join Date: Jul 2011
Posts: 152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
great numbers, i have an 02 2x4 sport with a similar list of mods minus the y pipe stat fans and TB. with no cat to a DI/DO flowmaster super 50. add a hughes cam, and sct not done by hemiferver. I just got it on the dyno on an 85 octane tune put down almost the same numbers in the 240 range but gotta say im think im kinda jealous that you got the same numbers on no cam. lol good work keep the mods going! anyone ever dyno their stock truck for a base line?


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
2002 DODGE RAM SPORT 1500 5.9 (TWIN TURBO IN THE WORKS!!!)
SCT tunner, Hughes cam, Hughes air gap intake, Flowmaster super 50 dual in dual out, K&N CAI, Long tube headers, No cat, New paint black w/ dark blue pearl flake, de-bagged, shaved tailgate, double din install.
STILL TO COME: center console 12" down fire sealed sub stock sound system revamp!

Last edited by Ram.Sport.02; 08-20-2011 at 10:37 AM.
Ram.Sport.02 is offline  
post #13 of 14 Old 08-20-2011, 10:18 AM
Lee Peterson
Registered User
 
Lee Peterson's Avatar
 
Join Date: Apr 2008
Location: Hamilton Ontario
Posts: 586
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Quote:
Originally Posted by Ram.Sport.02 View Post
I just got it on the dyno on an 85 octane tune put down almost the same numbers.
Is that 85 octane a typo? Why only 85? 91 would be way stronger.

2002 Dodge Ram 1500 4x4.

360 Magnum
Hughes FI Air Gap
52mm BBK TB
210/220 .512I.512E 110 LSA cam
MSD 6A , Blaster 2 Coil
Spintech muffler
SCT tuned by FlyinRyan


Trucks & Guns Club Member #88
Lee Peterson is offline  
post #14 of 14 Old 08-20-2011, 10:43 AM
Ram.Sport.02
DOGOS RULE!
 
Ram.Sport.02's Avatar
 
Join Date: Jul 2011
Posts: 152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
only cause i forgot to switch to the 91 before the pulls. I realized what it after we got done.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
2002 DODGE RAM SPORT 1500 5.9 (TWIN TURBO IN THE WORKS!!!)
SCT tunner, Hughes cam, Hughes air gap intake, Flowmaster super 50 dual in dual out, K&N CAI, Long tube headers, No cat, New paint black w/ dark blue pearl flake, de-bagged, shaved tailgate, double din install.
STILL TO COME: center console 12" down fire sealed sub stock sound system revamp!
Ram.Sport.02 is offline  
Closed Thread

Quick Reply
Message:
Options

Register Now



In order to be able to use most of our features, you must first register.
Please enter your desired User Name, your Email Address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
The registration process requires you to activate your membership by following a link in an E-Mail that will be sent to you immediately upon completing this form. You must enter a valid email address or you will not receive this activation code and you will NOT be registered. Your E-Mail address is NOT publicly available to anyone as policy.

AOL E-MAIL USERS: Please click HERE for important info pertaining to your e-mail address.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dyno day Hemi Freak 3G Dodge RAM Diesel Talk 15 10-30-2005 10:12 AM
AWD-DYNO will be at the CAR-B-QUE abodyjoe Mid-Atlantic Region 4 09-11-2005 08:06 AM
Dyno mitchgmace 3G Dodge Ram Performance Talk 16 07-31-2005 10:04 PM
Which Dyno is best; Dyno-Jet or Mustang FLDak 2G Dodge Dakota General Talk 3 12-29-2004 01:38 PM
First Dyno RM Indy 2G Dodge Ram Performance Talk 8 08-09-2004 10:39 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome