New Set Of Mp Headers - DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
Closed Thread
 
Thread Tools
post #1 of 19 Old 08-24-2009, 01:05 AM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
New Set Of Mp Headers

purchased a brand new complete set of MP headers or aka doug thorley tri-y's....i have all ways wanted a set of these headers but at 500 new i couldnt afford them...found them for 200 shipped brand new in the box ....couldnt pass that up....IMO these are the best headers for daily driving....there of the tri-y mid length header which is for low end torque...one down is they are for a 94-95 ram 4x4....that just put's a egr tube in pass side header i'll block that off....should have them this week...installed next weekend

my pacesetter headers will be for sale with header bolt's and stainless collector bolts
Attached Images
File Type: jpg thorley 2.jpg (29.4 KB, 198 views)
File Type: jpg thorley.jpg (29.3 KB, 196 views)

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
Quick Reply
Sponsored Links
Advertisement
 
post #2 of 19 Old 08-24-2009, 02:16 PM
lightning79
Be Cool!
 
lightning79's Avatar
 
Join Date: Apr 2007
Location: High Level
Posts: 985
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Good looking headers! I just had Edelbrock ceramic coated headers installed on mine, you'll notice they'll really dress up the engine!

2008 Ram 2500 4x4 automatic CTD

Armaguard boxliner, Bakflip Roll-X tonneau cover, LT285 70R17 Bridgestone Revo II ATs, Quaker State synthetic throughout, Mag-Hytec rear differential cover, Bilstein 4600 HD shocks, Silverline exhaust tip, Mag-Hytec transmission pan

Gone but not forgotten:

2001 Ram 1500 Quad Cab 4x4, 5.9 automatic

LT285 75/R16 BF Goodrich All Terrains, K&N FIPK, Flowmaster Super 40 SI/DO rear exit, with chrome tips
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Edelbrock ceramic coated headers, SCT Tuner by Hemifever, Fastman 52mm, Harland Sharp 1.7 roller rockers, Remote starter/keyless entry, Kenwood deck & speakers, Lund tonneau cover, Line-X bedliner, Detroit Truetrac, Oasis rear differential cover, Tinted windows, Mag-Hytec transmission pan, Mag-hytec front differential cover, Mopar tow hooks, Mopar fog lights, Mopar valve covers, Castrol Syntec oil throughout, Bilstein 5100s, Taylor blue 8mm spark plug wires, Motive Gear 4.10s, Trans-Go shift kit


Blue Dodge Truck Member #228
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
lightning79 is offline  
post #3 of 19 Old 08-24-2009, 09:41 PM
tphlegar
Registered User
 
tphlegar's Avatar
 
Join Date: Jan 2009
Location: Delta
Posts: 262
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
how much u lookin for on the pacesetters

1999 Ram 1500 5.9L 360
Pacesetter shorty headers
Magnaflow Y-pipe, hi-flow cat
Flowmaster 40 series SI/DO exhaust
Kool-Vue CAI
295/75/16 General Grabber AT2
3 inch body lift
Ohio Truck Club Member #14
Truck and Gun club member #131
Green Truck Club Member #46
tphlegar is offline  
Sponsored Links
Advertisement
 
post #4 of 19 Old 08-24-2009, 11:56 PM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
alittle bling bling for the motor

should look good on there....truthfully iam more old school....i'd rather have them coated white but thats not in the budget....not much into chrome....cant wait to get them on and feel the power

100obo for my pace headers plus shipping...there in perfect shape...never had a leak....no rust...painted with high temp BBQ paint , white....will re-paint if buyer want's with same stuff....

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
post #5 of 19 Old 08-25-2009, 12:24 AM
JonRoc
Creature Of The Wheel
 
JonRoc's Avatar
 
Join Date: Jan 2006
Location: Near Nashville
Posts: 8,860
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
i would have gone with longtubes when i got these shorties i have now, but do to it not fitting without cutting up crap & the like double in price turned me off...& at the time i had a lower paying job too.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

"Code Red" 07 Ram RC 2/4.5 2WD 4.7

McGaughys Deluxe 2/4.5-Two Toned OEM SRT10 Hood & Wing-TMD Bumper Cover
20" Black SRT10s-EFX Rollpan-GrillCraft MX Grille-Flame Red Heads-DMH ECutout
SC3865 w/ Trans Upgrade-Airaid CAI-70mm TB-MF YPipe-08 Intake Manifold
Radio Bez & Fuse Box Hydrodipped In Red Skulls-Misc Pieces In Carbon Fiber
NS'ed Sonar Smoked LED Tails & Recon 3rd-Red Grille LEDs-15% Tint-Nuvi 50LM
SiriusXM Radio-Sonnax Booster-Powerwire-Tailgate Bar-6" Stubbie-BT Emblem
Jet Stream Scoop-Cree 9W Rev LEDs-3W Int LEDs-Mopar Batt Shield
Bosch Icon Blades-Hawk HPS Pads-Belltech Street Shocks
JonRoc is offline  
post #6 of 19 Old 08-25-2009, 12:39 AM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
pace LT'S are a great initial price but like you said all the extra(y-pipe , cat ect...plus i cant use them here in cali....TRI-Y'S i can....they have a carb#....IMO....pace or any LT that use's 1-3/4 primary tubes on a stock motor/daily driver is over kill and to much header...tri-y's are 1-5/8's

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
post #7 of 19 Old 08-25-2009, 11:36 AM
tphlegar
Registered User
 
tphlegar's Avatar
 
Join Date: Jan 2009
Location: Delta
Posts: 262
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Pm'd ya dodgepickup

1999 Ram 1500 5.9L 360
Pacesetter shorty headers
Magnaflow Y-pipe, hi-flow cat
Flowmaster 40 series SI/DO exhaust
Kool-Vue CAI
295/75/16 General Grabber AT2
3 inch body lift
Ohio Truck Club Member #14
Truck and Gun club member #131
Green Truck Club Member #46
tphlegar is offline  
post #8 of 19 Old 08-26-2009, 12:19 AM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
pm recieved....pm sent

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
post #9 of 19 Old 08-26-2009, 01:01 AM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
got a brand new set of JBA 8mm wire's for sale....1992-2003 , 5.2-5.9 , there spirial core , numbered , blue....nice set of wire's IMAO...if my TAYLOR'S weren't so new i would run these no problem....45 shipped
Attached Images
File Type: jpg PICT0070.JPG (751.3 KB, 0 views)
File Type: jpg PICT0074.JPG (752.6 KB, 0 views)

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
post #10 of 19 Old 08-27-2009, 03:33 PM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
bump for a good deal

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
post #11 of 19 Old 08-27-2009, 08:53 PM
bigkuntry72
bigkuntry72
 
Join Date: Mar 2007
Location: waterford
Posts: 648
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
dont worry if you dont like the shiny chrome, itll fade in a hurry. youll be happy with those headers. i am. i dont know if it makes a difference that i have a 3/4 ton, but the y-pipe that came with them wouldnt fit on mine. hit the frame.

1997 ram 2500 4x4- 2inch leveling kit & 3inch body lift. 305/70/16 goodyear ats.

engine specs-360 bored & stroked to 408ci. eagle crank and rods, ross racing forged pistons( 10 to 1 cr), all arp hardware, ported heads, custom grind cam, melling high volume oil pump, moroso 7 qt oil pan, M1, F&B 55mm tb,FMS 30lbs matched injectors,14x5 open air filter, msd ignition, Doug Thorley tri-y headers to true duals, 2800 stall converter.SCT tuned by hemifever!!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


to do list- new paint, redo interior, bigger meats when i finish burnin up the 33's.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
bigkuntry72 is offline  
post #12 of 19 Old 08-27-2009, 11:55 PM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
i'll have to re-work the y-pipe going to the cat....these are for a 95 so i knew going in to it something wont fit right....hopefully i can get it all lined up/cut right and have my exhaust shop weld her up....that will be next week....can't wait

my pacesetters are sold pending payment next week....if that fall's threw i'll re list them for the other that were interested....

JBA WIRE'S are still available....there a good looking wire set...someone on here is ready for a tune-up ?

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
post #13 of 19 Old 09-01-2009, 09:20 PM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
got me new tri-y's in today....installed the headers in about 3 hours....used rtv ultra copper on both side's of the gaskets as i all way do....drove with open headers (dammm thats loud)slowly to my exhaust shop for them to re-work the y-pipe in to the cat....1 hour later they were done....being a 2.5in collectors and 2.5in y-pipes it has a deeper tone...not as racey sound or as loud as before....iam how ever likeing the new low end gitty-up....fitment was much better then i thought it would be....the driver y-pipe is routed alittle close to the tranny pan....will need fixing before next fluid change , no more money left lol.....need more then 5 miles for the pcm to re-learn....here's a few pic's

edit.........forgot to wipe down the headers with alcohol....this removes the oil's from your hands and allows the headers to blue in evenly and not yellow
Attached Images
File Type: jpg PICT0010.JPG (713.3 KB, 3 views)
File Type: jpg PICT0017.JPG (737.6 KB, 2 views)
File Type: jpg PICT0018.JPG (805.3 KB, 4 views)
File Type: jpg PICT0021.JPG (772.8 KB, 1 views)
File Type: jpg PICT0022.JPG (792.9 KB, 3 views)
File Type: jpg PICT0029.JPG (760.3 KB, 3 views)
File Type: jpg PICT0015.JPG (753.8 KB, 2 views)
File Type: jpg PICT0040.JPG (744.3 KB, 3 views)
File Type: jpg PICT0041.JPG (756.7 KB, 2 views)

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE

Last edited by DODGEPICKUP; 09-01-2009 at 09:27 PM.
DODGEPICKUP is offline  
post #14 of 19 Old 09-01-2009, 09:32 PM
tphlegar
Registered User
 
tphlegar's Avatar
 
Join Date: Jan 2009
Location: Delta
Posts: 262
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
those are some good lookin headers!

1999 Ram 1500 5.9L 360
Pacesetter shorty headers
Magnaflow Y-pipe, hi-flow cat
Flowmaster 40 series SI/DO exhaust
Kool-Vue CAI
295/75/16 General Grabber AT2
3 inch body lift
Ohio Truck Club Member #14
Truck and Gun club member #131
Green Truck Club Member #46
tphlegar is offline  
post #15 of 19 Old 09-01-2009, 09:45 PM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
ty....they are nice....and very well built....14ga pipeing....ill re-re-torque the bolt's for the next cpl of days

JBA wire set^^^^^^^^available for immediate shipping lol

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
post #16 of 19 Old 09-03-2009, 03:05 PM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
here's a vid of the new headers...sounding much better today....only 20 miles in

http://www.youtube.com/watch?v=3Ezbs8Bi8uc

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
post #17 of 19 Old 09-03-2009, 08:08 PM
Harrison_Berger
Registered User
 
Join Date: Aug 2009
Posts: 109
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
You cat is fully functional, correct?

What muffler do you have?

Your truck sounds awesome, does it drone at all?
Harrison_Berger is offline  
post #18 of 19 Old 09-05-2009, 10:09 PM
ozplanet
Just Call Me Oz
 
ozplanet's Avatar
 
Join Date: Oct 2007
Posts: 2,844
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Garage
Were there any problems with installation on the drivers side around the brake lines and tranny cooler lines ?

94 SLT 1500
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Flat Black 2wd


Mods: M1 / Comp Cams / 4.10 / 20" 3rd Gen Rims / 4/6 Drop / Flow Master 40's / All New Skins /

2010 Sport Crew Cab Black 4x4 5.7 3.92 Sport hood 10 Speaker Alpine w/nav

Mods: Diablo 91 Canned Tune / Billet Tech Oil Catch Can / Vararam Intake / Magnaflow Muffler / All Interior|Exterior Bulbs LED White / Recon Smoked 3rd Brake Light / Recon LED Light Bar / Orange Striping / Lockpick / Debaged|Murdered / 2 12" Foxbox / 2 Alpine SWR-12D4 Subs / NVX JAD1200.1 1200w amp / Flat Black VIP Wheels VP2 / Black & Orange Leather / Orange Interior Accents with Gloss Black /

Soon: Race Rotors / EBC Yellow Stuff /


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
ozplanet is offline  
post #19 of 19 Old 09-06-2009, 12:04 AM Thread Starter
DODGEPICKUP
Senior Member
 
DODGEPICKUP's Avatar
 
Join Date: Feb 2008
Posts: 2,217
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
(Thread Starter)
Quote:
Originally Posted by Harrison_Berger View Post
You cat is fully functional, correct?

What muffler do you have?

Your truck sounds awesome, does it drone at all?
yes the cat is functional....flowmaster 40 with no tail pipe just cut off flush at the 40....no drone what so ever....with my pacesetters and old stock y-pipe it was louder....my neighbors agree lol


oz....drive side y fit better then expected....however...it is running alittle close to the tranny pan bolt's....one bolt look's to be a pita to get to....i'll cross that bridge when it's time for a fluid change....for being a egr 94-95 set i'd give them a on fitment on a 99 4x4 lol

1999 RAM 1500SPORT QC 4X4 5.9 3.55's grrrr
360 MAGNUM POWER 165,000 MILES DYNOED 230/290 ON 35'S
1.7 CRANE ROLLER ROCKERS
DIY CUT,PORTED,EPOXY FILLED KEGGER/ALUMINUM PLENUM PLATE,53MM THROTTLE BODY
JACOBS PRO STREET CD IGNITION
BOSCH DESIGN 3'S 24LBS VETTE INJECTORS
MOPAR P DOUG THORLEY TRI-Y'S
TAYLOR 8.2 THUNDERVOLT WIRE'S
EBC ROTORS N PADS,RUSSELL SS BRAKE HOSES
MARCH UNDERDRIVE CRANK PULLEY
1 TON X-OVER STEERING
DT PRO-FAB TRAC BAR
HELL BENT STEEL 2IN SPACER/SKJ LCA
WINNDEKAR/DSS STEERING BRACE
DODGEPICKUP is offline  
Closed Thread

Quick Reply
Message:
Options

Register Now



In order to be able to use most of our features, you must first register.
Please enter your desired User Name, your Email Address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
The registration process requires you to activate your membership by following a link in an E-Mail that will be sent to you immediately upon completing this form. You must enter a valid email address or you will not receive this activation code and you will NOT be registered. Your E-Mail address is NOT publicly available to anyone as policy.

AOL E-MAIL USERS: Please click HERE for important info pertaining to your e-mail address.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for a set of headers for a 4.7 ram Spencer5007 Wanted - Dodge Truck Parts 0 09-22-2008 08:42 PM
bought a set of headers 360sst 2G Dodge Ram Performance Talk 12 07-30-2008 01:16 AM
What is a good set of headers to get? RamMan25 3G Dodge Ram Performance Talk 1 07-29-2008 10:08 AM
Is there a set of headers that bolt up to the stock cats? Mad Hemi 3G Dodge Ram Performance Talk 24 11-13-2006 11:55 PM
will a set of mopar perf. headers off of a 95 dodge ram 5.9l work on a-- greendurango 1G Dodge Durango Performance Talk 1 05-19-2003 09:44 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome