Kenny's Viper at Macedo Motorsports

Here's some photos by Sherdep in all my posts here. Clicky them to make Biggy!

These 3 are my Viper awaiting its turn to be worked on from around November 2005.

Here's more photos from earlier this week. Clicky them to make Biggy!

The engine has been pulled. These are the Viper without the engine.

Here's the disassembled engine block. Clicky pics to make Biggy!

Parts! Parts! Parts!

Transmission, flywheel, old parts, and new parts!

you're going to need a new license plate ....

WOW

don't drive faster than your guardian angel can fly



going for 1000 HP ?

I'm going for maximum reliability over maximum horsepower. Larry Macedo says it should easily be well over 700 rear wheel horsepower, close to 800 rear wheel horsepower. I expect it to have over 800 rear wheel horsepower. But it is conjecture at this point - the heads flow more than any existing ported and polished head; these are a new design head by one of the Chrysler engineers, Jeff Morys. These heads flow 350 cfm! A special new camshaft is being designed especially for use with these heads. The Roe Supercharger will be boosted to 10 pound boost. The fuel system will have a second fuel pump. The engine computer system will be supertuned in increments of 250 RPM. Plus a lot of other work.

I expect to run on a good track on street tires low 10's ET and mid 140's MPH.

[quote=RAM MAN]you're going to need a new license plate ....

Forget the new license plate....he is going to need speed brakes off of fighter jets to slow that thing down. Good luck!!!

you didnt post any of the Eakmobile on jack stands though so here it is
PS .... Clicky to make it Biggy

dimitrious was able to squeek out 735 rwhp out of a very similiar setup. but his detonates over 3500 rpm. he's gotta get it down to roe to do some real tuning by an expert like sean.

throw a 100 shot of nitrous on it and really be moving.

if i keep my car, thats the same setup plus the 100 shot i wanna install next winter.

Here are some Pics of the motor and the car as of 3-17-06 .. as Kenny would say Clikcy to make them Biggy

a Couple more ... Enjoy

Wow! Thanks Matt & Valerie! I was wondering how it was looking. It looks like my old engine is brand new again.

Originally Posted by SUN RA KAT

Wow! Thanks Matt & Valerie! I was wondering how it was looking. It looks like my old engine is brand new again.

Sorry I missed you last night there Kenny ...... was chatting with Larry and looks like they are waiting on the heads to come in ...... He was telling me you are going to be putting in a 4 point Roll Cage .. I think that is a great idea especially for how much Horsepower you are gonna be running.

you going with bigger brakes too? looks sweet i had a chance too see that beast up close and it is awsome the sound it makes is just sick

chuck
p.s you should bring it to the next dodgetalk meet in MI

I'd like to, but this time I won't take a chance on the park ranger yelling at me about the riot act and not going over 100 mph in the park.

Wow, keep the pictures and update coming. I always envy people that have stuff like this....

Man Kenny thats gonna be one beast when it gets all done ... keep us updated as im sure you will

Originally Posted by 05Dakota

Wow, keep the pictures and update coming. I always envy people that have stuff like this....

Me too - I can still hardly believe that I own a Viper.

Originally Posted by DakotaLivLrg

Man Kenny thats gonna be one beast when it gets all done ... keep us updated as im sure you will

Thank Matt and Valerie for the photos. It should be done pretty soon now if there's no more delay in getting the heads finished with the roller rockers, which should be this week.

wow kenny
cant wait to see that in person