Help!! Code P0760 and P0700 - DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
 HOME  FORUMS  GALLERY  GARAGE  TECH  CLASSIFIEDS  LINKS  MEMBER MAP  ARCHIVE  SPONSORS
INFO SITE HELP ARCADE TELL-A-FRIEND STAFF CONTACT US AUTO LOANS


DodgeTalk.com is the premier Dodge forum on the internet. Registered Users do not see the above ads.Please Register - It's Free!
Go Back   DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums > Dodge Vehicle Forums > Dodge Caravan/Grand Caravan Talk > Dodge Caravan General Talk

Closed Thread
 
Thread Tools

MQriley2
 
  Help!! Code P0760 and P0700 - Posted: 09-29-2005, 08:07 PM
Registered User
Joined: May 2005
Posts: 3
Status: Offline
Post #1

I need help. I have a 98 Dodge Grand Caravan and tonight, while driving it, the thing stopped shifting. It does not shift out of first gear. I got the codes from Auto Zone, P0760 and P0700. I know that P0700 is just a basic code for any tranny problems. Does anyone know what the heck P0760 is and what are the things I need to be looking for...sensor? wires? solenoid? Any clue on the pricing on some of this stuff. I have absolutely no clue where to start. P0760 is A malfunction in shift solenoid "C". Help is greatly appreciated.
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote
Sponsored Links
Advertisement
 

gas28man
 
 Posted: 09-30-2005, 12:39 AM
Registered User
Joined: Jun 2004
Posts: 984
City: Smyrna, TN
State: TN
Status: Offline
Post #2

Sounds like you need a new solenoid pack. Not an uncommon fix on these vehicles. It's external on the tranny, and not extraordinarily expensive to fix. I think some others on this board have replaced one themselves. Definitely don't let anyone talk you into a rebuild of the tranny, which they may try to do.

Good luck and let us know what happens.

Rick
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

MQriley2
 
 Posted: 10-07-2005, 06:10 PM
Registered User
Joined: May 2005
Posts: 3
Status: Offline
Post #3

Sorry I didn't post my solution earlier. Rick, I have to give you kuddos..you saved me a thousand dollars. It ended up being the solenoid pack. After replacing the solenoid pack and changing the tranny fluid again, it runs like new. You were right, every tranny person we talked to said that at our mileage, we were sure to need a new tranny. They even said that the solenoid pack "may" work for ten minutes, a month, or a few but eventually we will need a new tranny. Conveniently, this came from every tranny "salesman" in town.

Again, thanks for saving me so much money.

Renee
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

gas28man
 
 Posted: 10-07-2005, 06:15 PM
Registered User
Joined: Jun 2004
Posts: 984
City: Smyrna, TN
State: TN
Status: Offline
Post #4

No sweat. What was the bill, may I ask?

Rick
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

MQriley2
 
 Posted: 10-07-2005, 07:13 PM
Registered User
Joined: May 2005
Posts: 3
Status: Offline
Post #5

Small and sweet...$204 for the pack and $40 for the tranny fluid change. Much better than $1500. I just hope it keeps. No researching Durango issues haha.

Renee
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

pandeyrs
 
 Posted: 10-13-2005, 08:44 AM
Registered User
Joined: Sep 2005
Posts: 5
City: Gaithersburg
State: MD
Status: Offline
Post #6

I tried to post a response to this thread yesterday and I have no idea where it went. So here am I trying again. My 98 Plymouth Gr. Voyager SE 3.3L V6 has the same codes 0760 and 0700 with Service Engine soon light on. It went in limp mode and would not shift from 2nd to 3rd or 4th. The fluid is like new and Launch CReader scanner was unable to reset the warning light. I have been told by some mechanic that it will need a torque converter rebuild etc. or that the computer is fried. From Rick's post and Renee's experience it sounds like I need to put in a new solenoid pack. It costs $152 from an online source but I have no experience doing this kind of repair. Would someone give me a little advice on how to proceed with this. Also, any idea why would a solenoid pack fail. Last transmission service was done two years ago at 60K and now it is close to 80K and the fluid is still light pink and no burnt smell. Any help will be highly appreciated.

Thanks

Rakesh
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Forum Jump



All times are GMT -5. The time now is 11:41 PM.





Privacy Statement