Engine Codes P0336, P1693 ?? - DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
 HOME  FORUMS  GALLERY  GARAGE  TECH  CLASSIFIEDS  LINKS  MEMBER MAP  ARCHIVE  SPONSORS
INFO SITE HELP ARCADE TELL-A-FRIEND STAFF CONTACT US AUTO LOANS


DodgeTalk.com is the premier Dodge forum on the internet. Registered Users do not see the above ads.Please Register - It's Free!
Go Back   DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums > Dodge Truck, SUV and Van Forums > Truck Engine Technical Forums > Diesel Tech

Closed Thread
 
Thread Tools

kg1216
 
  Question Engine Codes P0336, P1693 ?? - Posted: 04-09-2005, 09:09 PM
Registered User
Joined: Apr 2005
Posts: 2
City: Cumming
State: GA
Status: Offline
Post #1

Have a 1999 Diesel Quad Cab 5.9...have the Hypertech PPIII installed...just this week my engine light came on and I ran the code finder and got the codes P0336 and P1693....the tach stopped working which made the engine light come on, but the tach started working again........Does anyone know where I can I find engine codes on-line, or what these codes mean and how I can fix the problem?
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote
Sponsored Links
Advertisement
 

Tech_John
 
 Posted: 04-09-2005, 09:16 PM
Tech_John's Avatar
Registered User
Joined: Sep 2004
Posts: 210
State: LA
Status: Offline
Post #2

P-0336 CRANKSHAFT POSITION SENSOR SIGNAL

Set Condition: The crankshaft position sensor indicates no engine speed or position
signal to ECM.

I am still looking for P1693 ??
__________________
2002 Ram 1500 Sport 4x4
4/5.5" SuperLift Suspension Lift
BFG 35x12.5x18 Mud Terrain T/A's
18" Weld Racing Mountain Crushers
AVIC-N1 Pioneer deck w/XM & voice command
many, many other mods
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

Tech_John
 
 Posted: 04-09-2005, 09:22 PM
Tech_John's Avatar
Registered User
Joined: Sep 2004
Posts: 210
State: LA
Status: Offline
Post #3

P1693–dtc Detected In Companion Module
__________________
2002 Ram 1500 Sport 4x4
4/5.5" SuperLift Suspension Lift
BFG 35x12.5x18 Mud Terrain T/A's
18" Weld Racing Mountain Crushers
AVIC-N1 Pioneer deck w/XM & voice command
many, many other mods
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

CrazyCooter1978
 
  All Codes - Posted: 04-09-2005, 09:23 PM
CrazyCooter1978's Avatar
Registered User
Joined: Sep 2003
Posts: 171
City: Ramsey
State: MN
Status: Offline
Post #4

P0030 (M) 1/1 O2 Sensor Heater Relay Circuit Problem detected in oxygen sensor heater relay circuit.

P0036 (M) 1/2 O2 Sensor Heater Relay Circuit Problem detected in oxygen sensor heater relay circuit.

P0106 Barometric Pressure Out of Range MAP sensor input voltage out of an acceptable range
detected during reading of barometric pressure at key-on.

P0107 (M) Map Sensor Voltage Too Low MAP sensor input below minimum acceptable voltage.

P0108 (M) Map Sensor Voltage Too High MAP sensor input above maximum acceptable voltage.

P0112 (M) Intake Air Temp Sensor Voltage Low Intake air (charge) temperature sensor input below the
minimum acceptable voltage.

P0113 (M) Intake Air Temp Sensor Voltage High Intake air (charge) temperature sensor input above the
maximum acceptable voltage.

P0116 A rationatilty error has been detected in the coolant temp
sensor.

P0117 (M) ECT Sensor Voltage Too Low Engine coolant temperature sensor input below the
minimum acceptable voltage.

P0118 (M) ECT Sensor Voltage Too High Engine coolant temperature sensor input above the
maximum acceptable voltage.

P0121 (M) TPS Voltage Does Not Agree With
MAP
TPS signal does not correlate to MAP sensor signal.

P0121 (M) Accelerator Position Sensor (APPS)
Signal Voltage Too Low
APPS voltage input below the minimum acceptable
voltage.

P0122 (M) Throttle Position Sensor Voltage Low Throttle position sensor input below the acceptable
voltage range.

P0122 (M) Accelerator Position Sensor (APPS)
Signal Voltage Too Low
APPS voltage input below the minimum acceptable
voltage.

P0123 (M) Throttle Position Sensor Voltage
High
Throttle position sensor input above the maximum
acceptable voltage.

P0123 (M) Accelerator Position Sensor (APPS)
Signal Voltage Too High
APPS voltage input above the maximum acceptable
voltage.

P0125 (M) Closed Loop Temp Not Reached Time to enter Closed Loop Operation (Fuel Control) is
excessive.

P0125 (M) Engine is Cold Too Long Engine does not reach operating temperature.

P0130 (M) 1/1 O2 Sensor Heater Circuit
Malfunction
Oxygen sensor heater element malfunction.

P0131 (M) 1/1 O2 Sensor Shorted To Ground Oxygen sensor input voltage maintained below normal
operating range.

P0132 (M) 1/1 O2 Sensor Shorted To Voltage Oxygen sensor input voltage maintained above normal
operating range.

P0133 (M) 1/1 O2 Sensor Slow Response Oxygen sensor response slower than minimum required
switching frequency.

P0134 (M) 1/1 O2 Sensor Stays at Center Neither rich or lean condition is detected from the oxygen
sensor input.

P0135 (M) 1/1 O2 Sensor Heater Failure Oxygen sensor heater element malfunction.

P0136 (M) 1/2 O2 Sensor Heater Circuit
Malfunction
Oxygen sensor heater element malfunction.

P0137 (M) 1/2 O2 Sensor Shorted To Ground Oxygen sensor input voltage maintained below normal
operating range.

P0138 (M) 1/2 O2 Sensor Shorted To Voltage Oxygen sensor input voltage maintained above normal
operating range.

P0139 (M) 1/2 O2 Sensor Slow Response Oxygen sensor response not as expected.

P0140 (M) 1/2 O2 Sensor Stays at Center Neither rich or lean condition is detected from the oxygen
sensor.

P0141 (M) 1/2 O2 Sensor Heater Failure Oxygen sensor heater element malfunction.

P0143 (M) 1/3 O2 Sensor Shorted To Ground Oxygen sensor input voltage maintained below normal
operating range.

P0144 (M) 1/3 O2 Sensor Shorted To Voltage Oxygen sensor input voltage maintained above normal
operating range.

P0145 (M) 1/3 O2 Sensor Slow Response Oxygen sensor response slower than minimum required
switching frequency.

P0146 (M) 1/3 O2 Sensor Stays at Center Neither rich or lean condition is detected from the oxygen
sensor.

P0147 (M) 1/3 O2 Sensor Heater Failure Oxygen sensor heater element malfunction.

P0151 (M) 2/1 O2 Sensor Shorted To Ground Oxygen sensor input voltage maintained below normal
operating range.

P0152 (M) 2/1 O2 Sensor Shorted To Voltage Oxygen sensor input voltage sustained above normal
operating range.

P0153 (M) 2/1 O2 Sensor Slow Response Oxygen sensor response slower than minimum required
switching frequency.

P0154 (M) 2/1 O2 Sensor Stays at Center Neither rich or lean condition is detected from the oxygen
sensor.

P0155 (M) 2/1 O2 Sensor Heater Failure Oxygen sensor heater element malfunction.

P0157 (M) 2/2 O2 Sensor Shorted To Ground Oxygen sensor input voltage maintained below normal
operating range.

P0158 (M) 2/2 O2 Sensor Shorted To Voltage Oxygen sensor input voltage maintained above normal
operating range.

P0159 2/2 O2 Sensor Slow Response Oxygen sensor response slower than minimum required
switching frequency.

P0160 (M) 2/2 O2 Sensor Stays at Center Neither rich or lean condition is detected from the oxygen
sensor.

P0161 (M) 2/2 O2 Sensor Heater Failure Oxygen sensor heater element malfunction.

P0168 Decreased Engine Performance Due
To High Injection Pump Fuel Temp
Fuel temperature is above the engine protection limit.
Engine power will be derated.

P0171 (M) 1/1 Fuel System Lean A lean air/fuel mixture has been indicated by an
abnormally rich correction factor.

P0172 (M) 1/1 Fuel System Rich A rich air/fuel mixture has been indicated by an
abnormally lean correction factor.

P0174 (M) 2/1 Fuel System Lean A lean air/fuel mixture has been indicated by an
abnormally rich correction factor.

P0175 (M) 2/1 Fuel System Rich A rich air/fuel mixture has been indicated by an
abnormally lean correction factor.

P0176 Loss of Flex Fuel Calibration Signal No calibration voltage present from flex fuel sensor.

P0177 Water In Fuel Excess water found in fuel by water-in-fuel sensor.

P0178 Flex Fuel Sensor Volts Too Low Flex fuel sensor input below minimum acceptable voltage.

P0178 Water In Fuel Sensor Voltage Too
Low
Loss of water-in-fuel circuit or sensor.

P0179 Flex Fuel Sensor Volts Too High Flex fuel sensor input above maximum acceptable
voltage.

P0181 Fuel Injection Pump Failure Low power, engine derated, or engine stops.

P0182 (M) CNG Temp Sensor Voltage Too Low Compressed natural gas temperature sensor voltage
below acceptable voltage.

P0183 (M) CNG Temp Sensor Voltage Too High Compressed natural gas temperature sensor voltage
above acceptable voltage.

P0201 (M) Injector #1 Control Circuit An open or shorted condition detected in control circuit for
injector #1 or the INJ 1 injector bank.

P0202 (M) Injector #2 Control Circuit An open or shorted condition detected in control circuit for
injector #2 or the INJ 2 injector bank.

P0203 (M) Injector #3 Control Circuit An open or shorted condition detected in control circuit for
injector #3 or the INJ 3 injector bank.

P0204 (M) Injector #4 Control Circuit Injector #4 or INJ 4 injector bank output driver stage does
not respond properly to the control signal.

P0205 (M) Injector #5 Control Circuit Injector #5 output driver stage does not respond properly
to the control signal.

P0206 (M) Injector #6 Control Circuit Injector #6 output driver stage does not respond properly
to the control signal.

P0207 (M) Injector #7 Control Circuit Injector #7 output driver stage does not respond properly
to the control signal.

P0208 (M) Injector #8 Control Circuit Injector #8 output driver stage does not respond properly
to the control signal.

P0209 (M) Injector #9 Control Circuit Injector #9 output driver stage does not respond properly
to the control signal.

P0210 (M) Injector #10 Control Circuit Injector #10 output driver stage does not respond properly
to the control signal.

P0215 Fuel Injection Pump Control Circuit Failure in fuel pump relay control circuit.

P0216 (M) Fuel Injection Pump Timing Failure High fuel supply restriction, low fuel pressure or possible
wrong or incorrectly installed pump keyway.

P0217 Decreased Engine Performance Due
To Engine Overheat Condition
Engine overheating. ECM will derate engine performance.

P0219 Crankshaft Position Sensor
Overspeed Signal
Engine has exceeded rpm limits.

P0222 (M) Idle Validation Signals Both Low Problem detected with idle validation circuits within APPS.

P0223 (M) Idle Validation Signals Both High
(Above 5 Volts)
Problem detected with idle validation circuits within APPS.

P0230 Transfer Pump (Lift Pump) Circuit
Out of Range
Problem detected in fuel transfer pump circuits.

P0232 Fuel Shutoff Signal Voltage Too High Fuel shut-off signal voltage too high from ECM to fuel
injection pump.

P0234 (M) Turbo Boost Limit Exceeded Problem detected in turbocharger wastegate.

P0236 (M) Map Sensor Too High Too Long Problem detected in turbocharger wastegate.

P0237 (M) Map Sensor Voltage Too Low MAP sensor voltage input below the minimum acceptable
voltage.

P0238 (M) Map Sensor Voltage Too High MAP sensor voltage input above the maximum
acceptable voltage.

P0251 (M) Fuel Inj. Pump Mech. Failure Fuel
Valve Feedback Circuit
Problem sensed with fuel circuit internal to fuel injection
pump.

P0253 (M) Fuel Injection Pump Fuel Valve
Open Circuit
Problem sensed with fuel circuit internal to fuel injection
pump.

P0254 Fuel Injection Pump Fuel Valve
Current Too High
Problem caused by internal fuel injection pump failure.

P0300 (M) Multiple Cylinder Mis-fire Misfire detected in multiple cylinders.

P0301 (M) CYLINDER #1 MISFIRE Misfire detected in cylinder #1.

P0302 (M) CYLINDER #2 MISFIRE Misfire detected in cylinder #2.

P0303 (M) CYLINDER #3 MISFIRE Misfire detected in cylinder #3.

P0304 (M) CYLINDER #4 MISFIRE Misfire detected in cylinder #4.

P0305 (M) CYLINDER #5 MISFIRE Misfire detected in cylinder #5.

P0306 (M) CYLINDER #6 MISFIRE Misfire detected in cylinder #6.

P0307 (M) CYLINDER #7 MISFIRE Misfire detected in cylinder #7

P0308 (M) CYLINDER #8 MISFIRE Misfire detected in cylinder #8.

P0309 (M) CYLINDER #9 MISFIRE Misfire detected in cylinder #9.

P0310 (M) CYLINDER #10 MISFIRE Misfire detected in cylinder #10.

P0320 (M) No Crank Referance Signal at PCM No reference signal (crankshaft position sensor) detected
during engine cranking.

P0320 (M) No RPM Signal to PCM (Crankshaft
Position Sensor Signal to JTEC)
A CKP signal has not been detected at the PCM.

P0325 Knock Sensor #1 Circuit Knock sensor (#1) signal above or below minimum
acceptable threshold voltage at particular engine speeds.

P0330 Knock Sensor #2 Circuit Knock sensor (#2) signal above or below minimum
acceptable threshold voltage at particular engine speeds.

P0336 (M) Crankshaft Position (CKP) Sensor
Signal
Problem with voltage signal from CKP.

P0340 (M) No Cam Signal At PCM No fuel sync

P0341 (M) Camshaft Position (CMP) Sensor
Signal
Problem with voltage signal from CMP.

P0350 Ignition Coil Draws Too Much
Current
A coil (1-5) is drawing too much current.

P0351 (M) Ignition Coil # 1 Primary Circuit Peak primary circuit current not achieved with maximum
dwell time.

P0352 (M) Ignition Coil # 2 Primary Circuit Peak primary circuit current not achieved with maximum
dwell time.

P0353 (M) Ignition Coil # 3 Primary Circuit Peak primary circuit current not achieved with maximum
dwell time.

P0354 (M) Ignition Coil # 4 Primary Circuit Peak primary circuit current not achieved with maximum
dwell time (High Impedance).

P0355 (M) Ignition Coil # 5 Primary Circuit Peak primary circuit current not achieved with maximum
dwell time (High Impedance).

P0356 (M) Ignition Coil # 6 Primary Circuit Peak primary circuit current not achieved with maximum
dwell time (high impedance).

P0357 (M) Ignition Coil # 7 Primary Circuit Peak primary circuit current not achieved with maximum
dwell time (high impedance).

P0358 (M) Ignition Coil # 8 Primary Circuit Peak primary circuit current not achieved with maximum
dwell time (high impedance).

P0370 Fuel Injection Pump Speed/Position
Sensor Sig Lost
Problem caused by internal fuel injection pump failure.

P0380 (M) Intake Air Heater Relay #1 Control
Circuit
Problem detected in #1 air heater solenoid/relay circuit
(not heater element)

P0381 (M) Wait To Start Lamp Inoperative Problem detected in wait-to-start bulb circuit.

P0382 (M) Intake Air Heater Relay #2 Control
Circuit
Problem detected in #2 air heater solenoid/relay circuit
(not heater element)

P0387 Crankshaft Position Sensor Supply
Voltage Too Low
CKP sensor voltage input below the minimum acceptable
voltage.

P0388 Crankshaft Position Sensor Supply
Voltage Too High
CKP sensor voltage input above the maximum acceptable
voltage.

P0401 EGR System Failure Required change in air/fuel ration not detected during
diagnostic test.

P0403 EGR Solenoid Circuit An open or shorted condition detected in the EGR
solenoid control circuit.

P0404 EGR Position Sensor Rationality EGR position sensor signal does not correlate to EGR
duty cycle.

P0405 EGR Position Sensor Volts Too Low EGR position sensor input below the acceptable voltage
range.

P0406 EGR Position Sensor Volts Too High EGR position sensor input above the acceptable voltage
range.

P0412 Secondary Air Solenoid Circuit An open or shorted condition detected in the secondary
air (air switching/aspirator) solenoid control circuit.

P0420 (M) 1/1 Catalytic Converter Efficiency Catalyst 1/1 efficiency below required level.

P0432 (M) 1/2 Catalytic Converter Efficiency Catalyst 2/1 efficiency below required level.

P0441 (M) Evap Purge Flow Monitor Insufficient or excessive vapor flow detected during
evaporative emission system operation.

P0442 (M) Evap Leak Monitor Medium Leak
Detected
A small leak has been detected in the evaporative
system.

P0443 (M) Evap Purge Solenoid Circuit An open or shorted condition detected in the EVAP purge
solenoid control circuit.

P0455 (M) Evap Leak Monitor Large Leak
Detected
A large leak has been detected in the evaporative system.

P0456 (M) Evap Leak Monitor Small Leak
Detected
Leak has been detected in the evaporative system.

P0460 Fuel Level Unit No Change Over
Miles
During low fuel

P0460 Fuel Level Unit No Change Over
Miles
Fuel level sending unit voltage does not change for more
than 40 miles.

P0462 Fuel Level Sending Unit Volts Too
Low
Fuel level sensor input below acceptable voltage.

P0462 (M) Fuel Level Sending Unit Volts Too
Low
Open circuit between PCM and fuel gauge sending unit.

P0463 Fuel Level Sending Unit Volts Too
High
Fuel level sensor input above acceptable voltage.

P0463 (M) Fuel Level Sending Unit Volts Too
High
Circuit shorted to voltage between PCM and fuel gauge
sending unit.

P0500 (M) No Vehicle Speed Sensor Signal No vehicle speed sensor signal detected during road load
conditions.

P0500 (M) No Vehicle Speed Sensor Signal A vehicle speed signal was not detected.

P0522 Oil Pressure Voltage Too Low Oil pressure sending unit (sensor) voltage input below the
minimum acceptable voltage.

P0523 Oil Pressure Voltage Too High Oil pressure sending unit (sensor) voltage input above the
maximum acceptable voltage.

P0524 Oil Pressure Too Low Engine oil pressure is low. Engine power derated.

P0545 A/C Clutch Relay Circuit Problem detected in air conditioning clutch relay control
circuit.

P0551 Power Steering Switch Failure Incorrect input state detected for the power steering
switch circuit. PL: High pressure seen at high speed.

P0562 Charging System Voltage Too Low Supply voltage sensed at ECM too low.

P0563 Charging System Voltage Too High Supply voltage sensed at ECM too high.

P0600 PCM Failure SPI Communications No communication detected between co-processors in the
control module.

P0601 (M) Internal Controller Failure Internal control module fault condition (check sum)
detected.

P0602 (M) ECM Fueling Calibration Error ECM Internal fault condition detected.

P0604 RAM Check Failure Transmission control module RAM self test fault detected.
-Aisin transmission

P0605 ROM Check Falure Transmission control module ROM self test fault detected
-Aisin transmission

P0606 (M) ECM Failure ECM Internal fault condition detected.

P0615 Starter Relay Control Circuit An open or shorted condition detected in the starter relay
control circuit.

P0622 (G) Generator Field Not Switching
Properly
An open or shorted condition detected in the generator
field control circuit.

P0645 A/C Clutch Relay Circuit An open or shorted condition detected in the A/C clutch
relay control circuit.

P0700 EATX Controller DTC Present This SBEC III or JTEC DTC indicates that the EATX or
Aisin controller has an active fault and has illuminated the
MIL via a CCD (EATX) or SCI (Aisin) message. The
specific fault must be acquired from the EATX via CCD or
from the Aisin via ISO-9141.

P0703 Brake Switch Stuck Pressed or
Released
Incorrect input state detected in the brake switch circuit.
(Changed from P1595)

P0711 (M) Trans Temp Sensor, No Temp Rise
After Start
Relationship between the transmission temperature and
overdrive operation and/or TCC operation indicates a
failure of the Transmission Temperature Sensor. OBD II
Rationality. Was MIL code 37.

P0712 Trans Temp Sensor Voltage Too Low Transmission fluid temperature sensor input below
acceptable voltage. Was MIL code 37.

P0712 (M) Trans Temp Sensor Voltage Too Low Voltage less than 1.55 volts (4-speed auto. trans. only).

P0713 Trans Temp Sensor Voltage Too
High
Transmission fluid temperature sensor input above
acceptable voltage. Was MIL code 37.

P0713 (M) Trans Temp Sensor Voltage Too
High
Voltage greater than 3.76 volts (4-speed auto. trans.
only).

P0720 (M) Low Output SPD Sensor RPM,
Above 15 MPH
The relationship between the Output Shaft Speed Sensor
and vehicle speed is not within acceptable limits.

P0720 (M) Low Output Spd Sensor RPM Above
15 mph
Output shaft speed is less than 60 rpm with vehicle speed
above 15 mph (4-speed auto. trans. only).

P0740 (M) Torq Con Clu, No RPM Drop at
Lockup
Relationship between engine and vehicle speeds
indicated failure of torque convertor clutch lock-up system
(TCC/PTU solenoid)

P0743 (M) Torque Converter Clutch Solenoid/
Trans Relay Circuits
An open or shorted condition detected in the torque
converter clutch (part throttle unlock) solenoid control
circuit. Shift solenoid C electrical fault - Aisin transmission

P0743 (M) Torque Converter Clutch Solenoid/
Trans Relay Circuits
An open or shorted condition detected in the torque
converter part throttle unlock solenoid control circuit (3 or
4-speed auto. trans. only).

P0748 (M) Governor Pressur Sol Control/Trans
Relay Circuits
An open or shorted condition detected in the Governor
Pressure Solenoid circuit or Trans Relay Circuit in JTEC
RE transmissions.

P0748 (M) Governor Pressure Sol Control/Trans
Relay Circuits
An open or shorted condition detected in the governor
pressure solenoid or relay circuits (4-speed auto. trans.
only).

P0751 (M) O/D Switch Pressed (Lo) More Than
5 Minutes
Overdrive override switch input is in a prolonged
depressed state.

P0751 (M) O/D Switch Pressed (LO) More Than
5 Min
Overdrive Off switch input too low for more than 5
minutes (4-speed auto. trans. only).

P0753 (M) Trans 3-4 Shift Sol/Trans Relay
Circuits
An open or shorted condition detected in the overdrive
solenoid control circuit or Trans Relay Circuit in JTEC RE
transmissions. Was MIL code 45.

P0753 (M) Trans 3-4 Shift Sol/Trans Relay
Circuits
An open or shorted condition detected in the transmission
2-4 shift solenoid circuit (4-speed auto. trans. only).

P0756 AW4 Shift Sol B (2-3) Functional
Failure
Shift solenoid B (2-3) functional fault - Aisin transmission

P0783 (M) 3-4 Shift Sol, No RPM Drop at
Lockup
The overdrive solenoid is unable to engage the gear
change from 3rd gear to the overdrive gear.

P0801 Reverse Gear Lockout Circuit Open
or Short
An open or shorted condition detected in the transmission
reverse gear lock-out solenoid control circuit.

P0830 Clutch Depressed Switch Circuit Problem detected in clutch switch circuit.

P0833 Clutch Released Switch Circuit Problem detected in clutch switch circuit.

P1110 Decrease Engine Performance Due
To High Intake Air Temperature
Intake manifold air temperature is above the engine
protection limit. Engine power will be derated.

P1180 Decreased Engine Performance Due
To High Injection Pump Fuel Temp
Fuel temperature is above the engine protection limit.
Engine power will be derated.

P1195 (M) 1/1 O2 Sensor Slow During Catalyst
Monitor
A slow switching oxygen sensor has been detected in
bank 1/1 during catalyst monitor test. (Also see SCI DTC
$66) (was P0133)

P1196 (M) 2/1 O2 Sensor Slow During Catalyst
Monitor
A slow switching oxygen sensor has been detected in
bank 2/1 during catalyst monitor test. (Also see SCI DTC
$7A) (was P0153)

P1197 1/2 O2 Sensor Slow During Catalyst
Monitor
A slow switching oxygen sensor has been detected in
bank 1/2 during catalyst monitor test. (Also see SCI DTC
$68) (was P0139)

P1198 Radiator Temperature Sensor Volts
Too High
Radiator coolant temperature sensor input above the
maximum acceptable voltage.

P1199 Radiator Temperature Sensor Volts
Too Low
Radiator coolant temperature sensor input below the
minimum acceptable voltage.

P1281 Engine is Cold Too Long Engine coolant temperature remains below normal
operating temperatures during vehicle travel (Thermostat).

P1282 Fuel Pump Relay Control Circuit An open or shorted condition detected in the fuel pump
relay control circuit.

P1283 Idle Select Signal Invalid ECM or fuel injection pump module internal fault condition
detected.

P1284 (M) Fuel Injection Pump Battery Voltage
Out-Of-Range
Fuel injection pump module internal fault condition
detected. Engine power will be derated.

P1285 (M) Fuel Injection Pump Controller
Always On
Fuel injection pump module relay circuit failure detected.
Engine power will be derated.

P1286 Accelerator Position Sensor (APPS)
Supply Voltage Too High
High voltage detected at APPS.

P1287 Fuel Injection Pump Controller
Supply Voltage Low
ECM or fuel injection pump module internal fault condition
detected. Engine power will be derated.

P1288 Intake Manifold Short Runner
Solenoid Circuit
An open or shorted condition detected in the short runner
tuning valve circuit.

P1289 Manifold Tune Valve Solenoid Circuit An open or shorted condition detected in the manifold
tuning valve solenoid control circuit.

P1290 CNG Fuel System Pressure Too
High
Compressed natural gas system pressure above normal
operating range.

P1291 No Temp Rise Seen From Intake
Heaters
Energizing Heated Air Intake does not change intake air
temperature sensor an acceptable amount.

P1291 (M) No Temperature Rise Seen From
Intake Air Heaters
Problem detected in intake manifold air heating system.

P1292 CNG Pressure Sensor Voltage Too
High
Compressed natural gas pressure sensor reading above
acceptable voltage.

P1293 CNG Pressure Sensor Voltage Too
Low
Compressed natural gas pressure sensor reading below
acceptable voltage.

P1294 (M) Target Idle Not Reached Target RPM not achieved during drive idle condition.
Possible vacuum leak or IAC (AIS) lost steps.

P1295 (M) No 5 Volts to TP Sensor Loss of a 5 volt feed to the Throttle Position Sensor has
been detected.

P1295 (M) Accelerator Position Sensor (APPS)
Supply Voltage Too Low
APPS supply voltage input below the minimum
acceptable voltage.

P1296 No 5 Volts to MAP Sensor Loss of a 5 volt feed to the MAP Sensor has been
detected.

P1297 (M) No Change in MAP From Start To
Run
No difference is recognized between the MAP reading at
engine idle and the stored barometric pressure reading.

P1298 Lean Operation at Wide Open
Throttle
A prolonged lean condition is detected during Wide Open
Throttle

P1299 Vacuum Leak Found (IAC Fully
Seated)
MAP Sensor signal does not correlate to Throttle Position
Sensor signal. Possible vacuum leak.

P1388 Auto Shutdown Relay Control Circuit An open or shorted condition detected in the ASD or CNG
shutoff relay control ckt.

P1388 Auto Shutdown Relay Control Circuit An open or shorted condition detected in the auto
shutdown relay circuit.

P1389 No ASD Relay Output Voltage At
PCM
No Z1 or Z2 voltage sensed when the auto shutdown
relay is energized.

P1389 (M) No ASD Relay Output Voltage at
PCM
An open condition detected In the ASD relay output
circuit.

P1390 Timing Belt Skipped 1 Tooth or More Relationship between Cam and Crank signals not correct

P1391 (M) Intermittent Loss of CMP or CKP Loss of the Cam Position Sensor or Crank Position
sensor has occurred. For PL 2.0L

P1398 (M) Mis-Fire Adaptive Numerator at Limit PCM is unable to learn the Crank Sensor’s signal in
preparation for Misfire Diagnostics. Probable defective
Crank Sensor

P1399 Wait To Start Lamp Cicuit An open or shorted condition detected in the Wait to Start
Lamp circuit.

P1403 No 5V to EGR Sens Loss of 5v feed to the EGR position sensor.

P01475 Aux 5 Volt Supply Voltage High Sensor supply voltage for ECM sensors is too high.

P1476 Too Little Secondary Air Insufficient flow of secondary air injection detected during
aspirator test (was P0411)

P1477 Too Much Secondary Air Excessive flow of secondary air injection detected during
aspirator test (was P0411).

P1478 Battery Temp Sensor Volts Out of
Limit
Internal temperature sensor input voltage out of an
acceptable range.

P1479 Transmission Fan Relay Circuit An open or shorted condition detected in the transmission
fan relay circuit.

P1480 PCV Solenoid Circuit An open or shorted condition detected in the PCV
solenoid circuit.

P1481 EATX RPM Pulse Perf EATX RPM pulse generator signal for misfire detection
does not correlate with expected value.

P1482 Catalyst Temperature Sensor Circuit
Shorted Low
Catalyst temperature sensor circuit shorted low.

P1483 Catalyst Temperature Sensor Circuit
Shorted High.
Catalyst temperature sensor circuit shorted high.

P1484 Catalytic Converter Overheat
Detected
A catalyst overheat condition has been detected by the
catalyst temperature sensor.

P1485 Air Injection Solenoid Circuit An open or shorted condition detected in the air assist
solenoid circuit.

P1486 Evap Leak Monitor Pinched Hose
Found
LDP has detected a pinched hose in the evaporative hose
system.

P1487 Hi Speed Rad Fan CTRL Relay
Circuit
An open or shorted condition detected in the control
circuit of the #2 high speed radiator fan control relay.

P1488 Auxiliary 5 Volt Supply Output Too
Low
Auxiliary 5 volt sensor feed is sensed to be below an
acceptable limit.

P1488 5 Volt Supply Voltage Low Sensor supply voltage for ECM sensors is too low.

P1489 High Speed Fan CTRL Relay Circuit An open or shorted condition detected in the control
circuit of the high speed radiator fan control relay.

P1490 Low Speed Fan CTRL Relay Circuit An open or shorted condition detected in control circuit of
the low speed radiator fan control relay.

P1491 Rad Fan Control Relay Circuit An open or shorted condition detected in the radiator fan
control relay control circuit. This includes PWM solid state
relays.

P1492 Ambient/Batt Temp Sen Volts Too
High
External temperature sensor input above acceptable
voltage.

P1492 (M) Ambient/Batt Temp Sensor Volts Too
High
Battery temperature sensor input voltage above an
acceptable range.

P1493 (M) Ambient/Batt Temp Sen Volts Too
Low
External temperature sensor input below acceptable
voltage.

P1493 (M) Ambient/Batt Temp Sen Volts Too
Low
Battery temperature sensor input voltage below an
acceptable range.

P1494 (M) Leak Detection Pump Sw or
Mechanical Fault
Incorrect input state detected for the Leak Detection
Pump (LDP) pressure switch.

P1495 Leak Detection Pump Solenoid
Circuit
An open or shorted condition detected in the Leak
Detection Pump (LDP) solenoid circuit.

P1496 5 Volt Supply, Output Too Low 5 volt sensor feed is sensed to be below an acceptable
limit. ( less than 4v for 4 sec )

P1498 High Speed Rad Fan Ground CTRL
Rly Circuit
An open or shorted condition detected in the control
circuit of the #3 high speed radiator fan control relay.

P1499 Hydraulic cooling fan solenoid circuit An open or shorted condition detected in the cooling fan
control solenoid circuit.

P1594 (G) Charging System Voltage Too High Battery voltage sense input above target charging voltage
during engine operation.

P1594 Charging System Voltage Too High Battery voltage sense input above target charging voltage
during engine operation.

P1595 Speed Control Solenoid Circuits An open or shorted condition detected in either of the
speed control vacuum or vent solenoid control circuits.

P1595 Speed Control Solenoid Circuits An open or shorted condition detected in the speed
control vacuum or vent solenoid circuits.

P1596 Speed Control Switch Always High Speed control switch input above maximum acceptable
voltage.

P1597 Speed Control Switch Always Low Speed control switch input below minimum acceptable
voltage.

P1597 Speed Control Switch Always Low Speed control switch input below the minimum acceptable
voltage.

P1598 A/C Pressure Sensor Volts Too High A/C pressure sensor input above maximum acceptable
voltage.

P1598 A/C Sensor Input Hi Problem detected in air conditioning electrical circuit.

P1599 A/C Pressure Sensor Volts Too Low A/C pressure sensor input below minimum acceptable
voltage.

P1599 A/C Sensor Input Lo Problem detected in air conditioning electrical circuit.

P1680 Clutch Released Switch Circuit Problem detected in clutch switch electrical circuit.

P1681 No I/P Cluster CCD/J1850
Messages Received
No CCD/J1850 messages received from the cluster
control module.

P1682 (G) Charging System Voltage Too Low Battery voltage sense input below target charging voltage
during engine operation and no significant change in
voltage detected during active test of generator output
circuit.

P1682 Charging System Voltage Too Low Charging system output voltage low.

P1683 SPD CTRL PWR Relay; or S/C 12v
Driver CKT
An open or shorted condition detected in the speed
control servo power control circuit.

P1683 Spd ctrl pwr rly, or s/c 12v driver
circuit
An open or shorted condition detected in the speed
control servo power control circuit.

P1684 Batt Loss in 50 Star The battery has been disconnected within the last 50
starts

P1685 SKIM Invalid Key The engine controler has received an invalid key from the
SKIM.

P1686 No SKIM BUS Messages Received No CCD/J1850 messages received from the Smart Key
Immobilizer Module (SKIM).

P1687 No MIC BUS Message No CCD/J1850 messages received from the Mechanical
Instrument Cluster (MIC) module.

P1688 (M) Internal Fuel Injection Pump
Controller Failure
Internal problem within the fuel injection pump. Low
power, engine derated, or engine stops.

P1689 (M) No Communication Between ECM
and Injection Pump Module
Data link circuit failure between ECM and fuel injection
pump. Low power, engine derated, or engine stops.

P1690 (M) Fuel Injection Pump CKP Sensor
Does Not Agree With ECM CKP
Sensor
Problem in fuel sync signal. Possible injection pump
timing problem. Low power, engine derated, or engine
stops.

P1691 Fuel Injection Pump Controller
Calibration Error
Internal fuel injection pump failure. Low power, engine
derated, or engine stops.

P1692 DTC Set In ECM A 9Companion DTC9 was set in both the ECM and PCM.

P1693 (M) DTC Detected in Companion Module A fault has been generated in the companion engine
control module.

P1693 (M) DTC Detected in PCM/ECM or DTC
Detected in ECM
A 9Companion DTC9 was set in both the ECM and PCM.

P1694 Fault In Companion Module No CCD/J1850 messages received from the powertrain
control module-Aisin transmission

P1694 (M) No CCD Messages received from
ECM
Bus communication failure to PCM.

P1695 No CCD/J1850 Message From Body
Control Module
No CCD/J1850 messages received from the body control
module.

P1696 PCM Failure EEPROM Write Denied Unsuccessful attempt to write to an EEPROM location by
the control module.

P1697 PCM Failure SRI Mile Not Stored Unsuccessful attempt to update Service Reminder
Indicator (SRI or EMR) mileage in the control module
EEPROM.

P1698 No CCD/J1850 Message From TCM No CCD/J1850 messages received from the electronic
transmission control module (EATX) or the Aisin
transmission controller.

P1698 No CCD Messages received from
PCM
Bus communication failure to PCM. A 9Companion DTC9
was set in both the ECM and PCM.

P1719 Skip Shift Solenoid Circuit An open or shorted condition detected in the transmission
2-3 gear lock-out solenoid control circuit.

P1740 TCC or OD Sol Perf A rationality error has been detected in either the TCC
solenoid or overdrive solenoid systems.

P1740 (M) TCC OR O/D Solenoid Performance Problem detected in transmission convertor clutch and/or
overdrive circuits (diesel engine with 4-speed auto. trans.
only).

P1756 (M) GOV Press Not Equal to Target @
15-20 PSI
The requested pressure and the actual pressure are not
within a tolerance band for the Governor Control System
which is used to regulate governor pressure to control
shifts for 1st, 2nd, and 3rd gear. (Mid Pressure
Malfunction)

P1756 (M) Governor Pressure Not Equal to
Target @ 15-20 PSI
Governor sensor input not between 10 and 25 psi when
requested (4-speed auto. trans. only).

P1757 GOV Press Not Equal to Target @
15-20 PSI
The requested pressure and the actual pressure are not
within a tolerance band for the Governor Control System
which is used to regulate governor pressure to control
shifts for 1st, 2nd, and 3rd gear (Zero Pressure
Malfunction)

P1757 (M) Governor Pressure Above 3 PSI In
Gear With 0 MPH
Governor pressure greater than 3 psi when requested to
be 0 psi (4-speed auto. trans. only).

P1762 (M) Gov Press Sen Offset Volts Too Lo
or High
The Governor Pressure Sensor input is greater than a
calibration limit or is less than a calibration limit for 3
consecutive park/neutral calibrations.

P1762 (M) Governor Press Sen Offset Volts Too
Low or High
Sensor input greater or less than calibration for 3
consecutive Neutral/Park occurrences (4-speed auto.
trans. only).

P1763 Governor Pressure Sensor Volts Too
Hi
The Governor Pressure Sensor input is above an
acceptable voltage level.

P1763 (M) Governor Pressure Sensor Volts Too
HI
Voltage greater than 4.89 volts (4-speed auto. trans.
only).

P1764 (M) Governor Pressure Sensor Volts Too
Low
The Governor Pressure Sensor input is below an
acceptable voltage level.

P1764 (M) Governor Pressure Sensor Volts Too
Low
Voltage less than .10 volts (4-speed auto. trans. only).

P1765 (M) Trans 12 Volt Supply Relay CTRL
Circuit
An open or shorted condition is detected in the
Transmission Relay control circuit. This relay supplies
power to the TCC

P1765 (M) Trans 12 Volt Supply Relay Ctrl
Circuit
Current state of solenoid output port is different than
expected (4-speed auto. trans. only).

P1899 (M) P/N Switch Stuck in Park or in Gear Incorrect input state detected for the Park/Neutral switch.

P1899 (M) P/N Switch Stuck in Park or in Gear Incorrect input state detected for the Park/Neutral switch
(3 or 4-speed auto. trans. only).



Josh
PS This list is taken from the 24V forum on the TDR. Thanx TMTT!
__________________
R.I.P HVAC
Local Chapter www.MNTDR.org
1996 Dodge Ram 3500, 0 Plate, 370 Diamond B Injectors, Green BHAF, 14cm turbo housing, boost elbow, 3kGSK, Goerends Custom Stator Triple Disc Converter and Transmission, Sirus satalite radio, Air Horns, Xenon headlights, 8000lbs Ramsey Winch, To much boost for the 35psi Guage, 15.3@92mph Best
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

Hemi Pete
 
 Posted: 04-09-2005, 09:32 PM
Hemi Pete's Avatar
The Legendary Cross Ram
Joined: Sep 2004
Posts: 3,701
Status: Offline
Post #5

CrazyCooter1978, how long did it take you to type all this in? Wow.
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

Hemi Pete
 
 Posted: 04-09-2005, 09:34 PM
Hemi Pete's Avatar
The Legendary Cross Ram
Joined: Sep 2004
Posts: 3,701
Status: Offline
Post #6

...and where are my manners?! Welcome to DodgeTalk.com, kg1216! Hope these two have helped you fix your problem!
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

CrazyCooter1978
 
 Posted: 04-09-2005, 10:16 PM
CrazyCooter1978's Avatar
Registered User
Joined: Sep 2003
Posts: 171
City: Ramsey
State: MN
Status: Offline
Post #7

I got the list from the Turbo Diesel Register. There is a master list over there in the 24v forum.

Josh
__________________
R.I.P HVAC
Local Chapter www.MNTDR.org
1996 Dodge Ram 3500, 0 Plate, 370 Diamond B Injectors, Green BHAF, 14cm turbo housing, boost elbow, 3kGSK, Goerends Custom Stator Triple Disc Converter and Transmission, Sirus satalite radio, Air Horns, Xenon headlights, 8000lbs Ramsey Winch, To much boost for the 35psi Guage, 15.3@92mph Best
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

kg1216
 
 Posted: 04-10-2005, 06:49 PM
Registered User
Joined: Apr 2005
Posts: 2
City: Cumming
State: GA
Status: Offline
Post #8

thanks for the help to allwho responded
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

lbeenken
 
 Posted: 04-10-2005, 11:38 PM
Registered User
Joined: Jan 2003
Posts: 843
City: Mason City
State: IA
Status: Offline
Post #9

So what exactly does that mean on the 1693 code? DTC deteced in the PCM/ECM? I also have this code in mine and was thinking it was the overboost again.
__________________
2001 Quadcab 4x4 HO Cummins & 6 spd 80hp BD injectors, Edge EZ, Banks power elbow with 4" straight pipe into 5" stacks, Autometer boost and pyro gauges in the pillar, Southbend metallic CON FE clutch, Banks High Ram Intake

dyno'd at 300HP and 810TQ at the rears
360HP and 970TQ at the crank
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

JamesJ2525
 
 Posted: 04-10-2005, 11:41 PM
JamesJ2525's Avatar
Hotty Toddy Gosh Almighty
Joined: Oct 2004
Posts: 5,121
City: Ridgeland
State: MS
Status: Offline
View This User's Gallery View This User's Garage
Post #10

Sounds like there was some sort of programming error when you used that Hypertech programmer. I would set it back to stock and see if the codes go away.
__________________
2003 Ram 1500 SLT Regular Cab, 360 V8, 3.92 Limited Slip, 4X4 Offroad Package, 1.5" Torsion Bar Crank, Rancho RS 5000 Shocks, LT 275/70R17 Cooper Discoverer S/Ts, K&N Airfilter, Mopar (Borla) Performance Exhaust, Mopar Running Boards, Mopar Slush Mats, Sirius Satellite Radio, Coin Holder
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

ronfire
 
  code 1693 - Posted: 04-18-2005, 11:46 AM
ronfire's Avatar
Registered User
Joined: Apr 2004
Posts: 93
City: Langley B.C. Canada
State: BC
Status: Offline
Post #11

I also have a 1693 code, it has been there for a year. I can not clear it with a super chip programer. It does not apear in the programer only in the odimeter reading. How can I get rid of it and what causes the code in the first place?
__________________
Ronfire

Silver 3500 Sport 6 spd. Alum. running boards, Pac Brake,2 pair set of air horns :SPIN Upgraded from my 2001 3500
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

JamesJ2525
 
 Posted: 04-18-2005, 11:50 AM
JamesJ2525's Avatar
Hotty Toddy Gosh Almighty
Joined: Oct 2004
Posts: 5,121
City: Ridgeland
State: MS
Status: Offline
View This User's Gallery View This User's Garage
Post #12

Probably the SuperChips Programmer. Return to stock program, and disconnect your battery for about 5 minutes. I bet when you hook it back up it disappears.
__________________
2003 Ram 1500 SLT Regular Cab, 360 V8, 3.92 Limited Slip, 4X4 Offroad Package, 1.5" Torsion Bar Crank, Rancho RS 5000 Shocks, LT 275/70R17 Cooper Discoverer S/Ts, K&N Airfilter, Mopar (Borla) Performance Exhaust, Mopar Running Boards, Mopar Slush Mats, Sirius Satellite Radio, Coin Holder
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

ronfire
 
 Posted: 04-21-2005, 09:24 AM
ronfire's Avatar
Registered User
Joined: Apr 2004
Posts: 93
City: Langley B.C. Canada
State: BC
Status: Offline
Post #13

the 1693 code was before I had any mods done, I tried disconecting the batteries with no results , still have the code 1693
__________________
Ronfire

Silver 3500 Sport 6 spd. Alum. running boards, Pac Brake,2 pair set of air horns :SPIN Upgraded from my 2001 3500
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2004½ Ram Diesel - 325hp / 600ft-lb dodge_em Diesel Tech 45 07-13-2004 09:39 PM
Fuel Efficiency Suggestions Linetrouble 1G Dodge Durango Performance Talk 20 06-08-2004 02:23 AM
5W-30 or 5W-50 luisimo 3G Dodge RAM - Drivetrain Talk 6 04-08-2004 12:14 AM
Dirty Looking Oil dodgehemi345hp 3G Dodge RAM - General Talk 12 09-26-2003 05:37 PM
Performance Diesel tips (VERY LONG) RAM MAN Diesel Tech 7 06-14-2002 08:02 AM



All times are GMT -5. The time now is 10:17 PM.





Privacy Statement