315s on a 2500 - DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
 
Thread Tools
#1 Old 11-22-2012, 09:21 PM
JFM-jr
Registered User
 
JFM-jr's Avatar
 
Join Date: Jul 2010
Location: Long Island Suffolk Cnty
Posts: 878
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
315s on a 2500

Does anybody know what I will need to fit a 315 or a 35 on my 09 2500? level kit,a lift? Will going to an aftermarket rim make my life easier? these 265's gotta go man they look silly on this truck.

09 Hemi powered Ram QC 2500 Sport
Fuel Boost rims 17x9 +20MM
Nitto Terra Grapplers 305/70/17
OEM 4.56 gears
SuperChips Cortex 3950 (1449666)
JFM-jr is offline  
Sponsored Links
Advertisement
 
#2 Old 11-22-2012, 10:07 PM
04Ram2500Hemi
Same Name, Different Game
 
04Ram2500Hemi's Avatar
 
Join Date: Mar 2005
Location: Missoula
Posts: 9,552
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
You can run a 33" tire on the 2500's with no lift and they look great. If you do a 35" tire I'd recommend a 2" leveling kit.

2012 Ram Power Wagon
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill

Gone But Never Forgotten!
2004 Ram 2500 4X4 SLT Quad Cab Hemi Silver Metallic, Black Line-X Rocker Panel, Westin Nerf Bars Sprayed with Line-X, Bushwacker Extend A Fender Sprayed with Line-X, Rhino Lining in the Bed and Over the Rails, Truxedo Low Profile Tonneau Cover, Hell 500's Behind the Grill, Warn Front Receiver, KC Backup Lights, Custom Mounted Bumper Backup Lights, V-7 V Force Muffler, Auto Meter Transmission Temperature Gauge, SRT-10 Pillar Grab Handle, Kore Recon Suspension System, Kore Race Steering Damper, Kore Chase Control Arms, Kore Coil Spring Isolator, Kore End Links, 35x12.50 Mud Terrain SXT Tires, SRT-10 Hood, AEM Brute Force Intake, Wet Okole Seat Covers, Smoked Recon Cab Lights, Tuff Stuff 12,500 Pound Multi Point Winch
04Ram2500Hemi is offline  
#3 Old 11-23-2012, 07:14 AM
cumminsmannow
diesel guy
 
cumminsmannow's Avatar
 
Join Date: Sep 2008
Posts: 441
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
I ran 35's on both of my 3rd gen 2500's and had less problems without a lift. I tried a 2" leveling kit and it made the tires rub on the mud flaps because the tire was closer to the rear of the wheelwell. I took the levelers out and it didnt rub at all any more on the flaps.
I had stock wheels and they did rub a little on the lower control arms at full lock so i added a set of 3/8" wheel spacers and no more rub at all.
With an aftermarket wheel you will have to get as close to the factory offset as possible to not have issues.

2012 2500 megacab 4x4 hemi laramie.
Mineral grey/ Bright silver bottom.
cumminsmannow is offline  
#4 Old 11-23-2012, 07:52 AM
JFM-jr
Registered User
 
JFM-jr's Avatar
 
Join Date: Jul 2010
Location: Long Island Suffolk Cnty
Posts: 878
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Quote:
Originally Posted by cumminsmannow View Post
I had stock wheels and they did rub a little on the lower control arms at full lock so i added a set of 3/8" wheel spacers and no more rub at all.
With an aftermarket wheel you will have to get as close to the factory offset as possible to not have issues.
If you needed a 3/8 spacer on the factory rim then why would I want a factory offset? Wouldnt I want an offset that avoids me needing that spacer?

09 Hemi powered Ram QC 2500 Sport
Fuel Boost rims 17x9 +20MM
Nitto Terra Grapplers 305/70/17
OEM 4.56 gears
SuperChips Cortex 3950 (1449666)
JFM-jr is offline  
#5 Old 11-23-2012, 08:43 AM
cumminsmannow
diesel guy
 
cumminsmannow's Avatar
 
Join Date: Sep 2008
Posts: 441
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Yes but it is hard to find in aftermarket wheels. Unless you get xd's or spend alot of money on them it seems like all the manufacturers want the wheels pushed way out and have a shallow backspacing. The incubus wheels i had on my 12 had a good combo of offset and width but i never had 35's on them to see how they fit. If i remember correctly the factory wheels are +43mm offset. And my incubus ones are a 9" wheel with a +21mm offset.

2012 2500 megacab 4x4 hemi laramie.
Mineral grey/ Bright silver bottom.
cumminsmannow is offline  
#6 Old 11-24-2012, 08:52 AM
ramminsilver
Registered User
 
ramminsilver's Avatar
 
Join Date: Apr 2004
Location: NB
Posts: 515
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
I'm running 295/70/18's with no rubbing whats so ever which is close to a 34 x 12.50.

2004 DODGE RAM 2500 LARAMIE w/ THE HEMI - BLACK ON BLACK/GRAY LEATHER - 295/70/18 NITTO TRAIL GRAPPLERS - 18x9 FUEL BOOST 5.75" BS/+20 OFFSET - AEM BRUTE FORCE CAI -CUSTOM MAGNAFLOW CAT-BACK EXHAUST 14" SI/SO - MAGNAFLOW Y-PIPE - NGK 5306 SPARKPLUGS - DIEHARD PLATINUM BATTERY - RECON SMOKED CAB AND 3RD BRAKE LIGHTS - RECON FIRE AND ICE TAILGATE BAR - TOTAL LED CONVERSION FRONT TO REAR - BILSTEIN'S ALL AROUND - EXTANG FULLTILT TONNEAU COVER - ALPINE 9886 HEAD UNIT AND ALPINE MRP_M300 AMP - JL AUDIO 12w1v2 SUBWOOFER - AVITAL 4103 REMOTE START AND KEYLESS ENTRY - UNIQUE COATINGS FLASHTECH HIDS - 9007 6000K BI-XENON HEADS AND 9006 6000K FOGS - EZ-DOWN TAILGATE ASSIST - HUSKY FLOORMATS - SUPERCHIPS CORTEX 3950 w/ TRANNY TUNE - MOPAR REAR WHEEL WELL LINERS - BUSHWACKER EXTEND-A-FENDERS - TEKONSHA PRODIGY BRAKE CONTROLLER-AUTO METER FACTORY MATCHED TRANNY TEMP GAUGE
ramminsilver is offline  
#7 Old 11-24-2012, 10:16 AM
04Ram2500Hemi
Same Name, Different Game
 
04Ram2500Hemi's Avatar
 
Join Date: Mar 2005
Location: Missoula
Posts: 9,552
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
The trick is to not go over 11.50 wide or you will rub on the control arms. My buddy had a 2006 with 33x11.50 on stock rims on his HD and it looked great. If you don't want to mess with a lift or spacers that's the route I would go.

2012 Ram Power Wagon
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill

Gone But Never Forgotten!
2004 Ram 2500 4X4 SLT Quad Cab Hemi Silver Metallic, Black Line-X Rocker Panel, Westin Nerf Bars Sprayed with Line-X, Bushwacker Extend A Fender Sprayed with Line-X, Rhino Lining in the Bed and Over the Rails, Truxedo Low Profile Tonneau Cover, Hell 500's Behind the Grill, Warn Front Receiver, KC Backup Lights, Custom Mounted Bumper Backup Lights, V-7 V Force Muffler, Auto Meter Transmission Temperature Gauge, SRT-10 Pillar Grab Handle, Kore Recon Suspension System, Kore Race Steering Damper, Kore Chase Control Arms, Kore Coil Spring Isolator, Kore End Links, 35x12.50 Mud Terrain SXT Tires, SRT-10 Hood, AEM Brute Force Intake, Wet Okole Seat Covers, Smoked Recon Cab Lights, Tuff Stuff 12,500 Pound Multi Point Winch
04Ram2500Hemi is offline  
#8 Old 11-24-2012, 10:16 AM
cumminsmannow
diesel guy
 
cumminsmannow's Avatar
 
Join Date: Sep 2008
Posts: 441
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by ramminsilver View Post
I'm running 295/70/18's with no rubbing whats so ever which is close to a 34 x 12.50.
What wheels/offset do you have. Because that's the key.

2012 2500 megacab 4x4 hemi laramie.
Mineral grey/ Bright silver bottom.
cumminsmannow is offline  
#9 Old 11-24-2012, 11:37 AM
JFM-jr
Registered User
 
JFM-jr's Avatar
 
Join Date: Jul 2010
Location: Long Island Suffolk Cnty
Posts: 878
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Im liking the Nitto Terra Grappler in the 305/70/17 wich is almost 34 inches and an E load rating

09 Hemi powered Ram QC 2500 Sport
Fuel Boost rims 17x9 +20MM
Nitto Terra Grapplers 305/70/17
OEM 4.56 gears
SuperChips Cortex 3950 (1449666)
JFM-jr is offline  
#10 Old 11-25-2012, 10:28 AM
ramminsilver
Registered User
 
ramminsilver's Avatar
 
Join Date: Apr 2004
Location: NB
Posts: 515
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
+20 offset

2004 DODGE RAM 2500 LARAMIE w/ THE HEMI - BLACK ON BLACK/GRAY LEATHER - 295/70/18 NITTO TRAIL GRAPPLERS - 18x9 FUEL BOOST 5.75" BS/+20 OFFSET - AEM BRUTE FORCE CAI -CUSTOM MAGNAFLOW CAT-BACK EXHAUST 14" SI/SO - MAGNAFLOW Y-PIPE - NGK 5306 SPARKPLUGS - DIEHARD PLATINUM BATTERY - RECON SMOKED CAB AND 3RD BRAKE LIGHTS - RECON FIRE AND ICE TAILGATE BAR - TOTAL LED CONVERSION FRONT TO REAR - BILSTEIN'S ALL AROUND - EXTANG FULLTILT TONNEAU COVER - ALPINE 9886 HEAD UNIT AND ALPINE MRP_M300 AMP - JL AUDIO 12w1v2 SUBWOOFER - AVITAL 4103 REMOTE START AND KEYLESS ENTRY - UNIQUE COATINGS FLASHTECH HIDS - 9007 6000K BI-XENON HEADS AND 9006 6000K FOGS - EZ-DOWN TAILGATE ASSIST - HUSKY FLOORMATS - SUPERCHIPS CORTEX 3950 w/ TRANNY TUNE - MOPAR REAR WHEEL WELL LINERS - BUSHWACKER EXTEND-A-FENDERS - TEKONSHA PRODIGY BRAKE CONTROLLER-AUTO METER FACTORY MATCHED TRANNY TEMP GAUGE
ramminsilver is offline  
#11 Old 11-26-2012, 01:09 AM
Abused_Hemi
Registered User
 
Abused_Hemi's Avatar
 
Join Date: Jul 2011
Location: saint elizabeth
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
I've ran 35"s and now running 37x12.50 on my 06 2500 with 2 leveling kit, only rub is at full lock on lower control arms but that didnt bother me. thats with stock wheels
Abused_Hemi is offline  
#12 Old 11-27-2012, 04:33 PM
coder
Registered User
 
coder's Avatar
 
Join Date: Mar 2007
Posts: 1,685
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by JFM-jr View Post
Im liking the Nitto Terra Grappler in the 305/70/17 wich is almost 34 inches and an E load rating
You can run these sizes with no issues on a stock height suspension. Tire under 35" forget the leveling kits the issue is the tire width not the height.

285/70-17 (32.5x11.50x17)
285/75-17 (34x11.50x17)
295/70-17 (33.5x12.00x17)
305/70-17 (34x12.00x17)

2007 Quad Cab Power Wagon
Suspension: Carli 3" Hemi Coils | Carli Control Arms | Carli King 2.5 Pin-Tops | Carli Stainless Steel Damper | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Toyo ATII's 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Redhead Steering Gear
Miscellaneous: EBC Front Slotted Dimpled Rotors | Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | DieHard Platinum Battery G65 | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
coder is offline  
#13 Old 11-27-2012, 04:37 PM
JFM-jr
Registered User
 
JFM-jr's Avatar
 
Join Date: Jul 2010
Location: Long Island Suffolk Cnty
Posts: 878
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
Thanks for all the input in this thread guys I appreciate it. Now I gotta decide on the gears im gonna start another thread about that. The install shop quoted me a big number.

09 Hemi powered Ram QC 2500 Sport
Fuel Boost rims 17x9 +20MM
Nitto Terra Grapplers 305/70/17
OEM 4.56 gears
SuperChips Cortex 3950 (1449666)
JFM-jr is offline  
#14 Old 11-28-2012, 05:49 PM
MonsoonMike
Moderator Mike
 
MonsoonMike's Avatar
 
Join Date: Aug 2005
Location: Chandler
Posts: 21,995
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
I ran them with no lift.



I hear these load range D BFGs suck for our trucks. too soft and help with death wobble.


::2014 Ram 2500 CTD Crew Cab Granite Crystal Metallic::

MonsoonMike is offline  
#15 Old 11-28-2012, 09:12 PM
JFM-jr
Registered User
 
JFM-jr's Avatar
 
Join Date: Jul 2010
Location: Long Island Suffolk Cnty
Posts: 878
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
I like those rims the Vtec Raptors caught my eye long ago. Do you know what offset they are +18 or +25 ?

09 Hemi powered Ram QC 2500 Sport
Fuel Boost rims 17x9 +20MM
Nitto Terra Grapplers 305/70/17
OEM 4.56 gears
SuperChips Cortex 3950 (1449666)
JFM-jr is offline  
#16 Old 11-28-2012, 10:09 PM
Hemi_2500
Bigg Rigg
 
Hemi_2500's Avatar
 
Join Date: Jun 2006
Location: Carterville
Posts: 2,051
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by 07MegaCabRam View Post
I ran them with no lift.



I hear these load range D BFGs suck for our trucks. too soft and help with death wobble.
I have had no trouble of out my BFG's and they are load range D now I dont hual anything heavy in the back. I put almost 35,000 and not once had a problem with DW.

You not liking yours.

O and I'm running 315/70/R17 stock with just a slight rub on control arm at full lock.

Proud Member of the White Truck Club #77
Proud Member of the Military Truck Club #10
2013 Dodge Dart Limited Turbo
2003 Dodge Ram 2500 Hemi
2013 Dodge Journey Blacktop Edition
Hemi_2500 is offline  
#17 Old 11-30-2012, 03:22 PM
MonsoonMike
Moderator Mike
 
MonsoonMike's Avatar
 
Join Date: Aug 2005
Location: Chandler
Posts: 21,995
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
Quote:
Originally Posted by JFM-jr View Post
I like those rims the Vtec Raptors caught my eye long ago. Do you know what offset they are +18 or +25 ?

Sorry, I don't know. They were on the truck when I got it. I'll try to see what I can find for you.

I need to try to get some new center caps. The no caps have grown on me but.. might like them with them.

The tires are ok.. I had DW and it was my old steering. But the new coils I put in helped, that with the tires, tie rods, steering stab all played into it.


::2014 Ram 2500 CTD Crew Cab Granite Crystal Metallic::

MonsoonMike is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to use most of our features, you must first register.
Please enter your desired User Name, your Email Address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
The registration process requires you to activate your membership by following a link in an E-Mail that will be sent to you immediately upon completing this form. You must enter a valid email address or you will not receive this activation code and you will NOT be registered. Your E-Mail address is NOT publicly available to anyone as policy.

AOL E-MAIL USERS: Please click HERE for important info pertaining to your e-mail address.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
285 or 315s?? dodgepower88 2G Dodge RAM - 4X4 Talk 16 10-10-2012 02:27 PM
315s on stock 2500? Dillyw 4G Dodge RAM - Tire and Wheel Talk 20 12-17-2011 11:25 PM
2500 -305s,315s with chrome steel wheels? Captain Salty 3G Dodge RAM - Tire and Wheel Talk 12 02-14-2006 02:01 AM
315s 0n 2500 3.73 need a programmer? Captain Salty 3G Dodge RAM - 4X4 Talk 11 02-11-2006 01:42 PM
New 315s gr8art 3G Dodge RAM - 4X4 Talk 14 11-08-2003 09:03 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome