No TMR delete for my 03? - DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
 
Thread Tools
#1 Old 09-11-2009, 01:55 PM
mike_ct
Registered User
 
Join Date: Jul 2005
Posts: 130
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
(Thread Starter)
No TMR delete for my 03?

build date on door is 10/02; and its a 4.7 - felt ambitious today, and went to snoop around and do a TMR delete; and i see my PCM on the firewall has "4 plugs". Isn't this the new style? I also did not see the TCM i've seen on the other trucks and writeups for doing the TMR wire delete.

Any idea what this means for me? Also as a note, I tried to use a superchips a while back, and it would not work correctly - it was unable to read my stock configuration - I went back and forth with superchips tech a few times, and eventually gave up on the idea and just left it alone.

Now I cant figure out whats up with my truck - did it have something changed or updated at some point where the TCM and old 3-plug PCM removed and changed over to a 4-plug? or were some early 2003 trucks produced without separate TCM (and thus unable to do the TMR delete mod).

Any input appreciated..As of now I'm bummed out; no TMR delete and can't run the superchips either.

2003 Ram 1500QC Offroad Pkg. 4.7 | Magnaflow, AirLiftCo RideControl, 5th Wheel Hitch 110k
2005 Ram 2500HD QC | Gibson, Superchips, 2nd set of exhaust manifolds + fasteners, 5th Wheel Hitch 170k (never tuned, trans never touched, orignal brakes..truck plows and tows daily, burns rubber, and gets beat on)
2011 Ram 2500 Laramie QC 66k Sweet!! Freakin sweet truck is all I have to say.
2006 Ram 2500 SLT 5.7 QC118k Daily Driver..
mike_ct is offline  
Sponsored Links
Advertisement
 
#2 Old 01-14-2010, 05:14 PM
OfcBanks
Registered User
 
OfcBanks's Avatar
 
Join Date: Oct 2009
Location: Sugar Valley
Posts: 1,042
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
what is the tcm wire cut mod and what does it do?

Current2007 QCSB black Dodge Ram 2500 4x4 5.9 CTD

Current Mods:
TGC 2.5 in leveling kit, Toyo M/t 35's, Brushguard, N-Fab steps, Bilstein steering stabilizer, Bilstein 5100's up front, RSD 5in TBE exhaust, Edge with Attitude *hot unlock* with dash mount, Pusher intake elbow, AFE Stage 2 Mega Cannon, Truxedo tonneau cover, B&W gooseneck ball, Line-x bed

Future Mods: Color matched sport grill, Hella 1000's, Amp research steps (I hope)

Past:
2003 QCSB white Dodge Ram 1500 Laramie 4x4 5.7L Hemi Lots of mods
1986 Toyota 4x4 with custom flatbed
1990 Chevrolet 1500 4X4 3xx,000 miles and still running strong
OfcBanks is offline  
#3 Old 01-14-2010, 06:46 PM
BigHemiTex
Tex
 
BigHemiTex's Avatar
 
Join Date: Oct 2007
Location: Dallas/Ft. Worth
Posts: 3,717
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by OfcBanks View Post
what is the tcm wire cut mod and what does it do?
on the 2003 i think you can cut the tcm wire and get rid of tq managment for harder shifts

2003 Hemi + Mods
BigHemiTex is offline  
#4 Old 01-14-2010, 07:46 PM
crasher76
Im wired!!!
 
crasher76's Avatar
 
Join Date: May 2009
Location: K-TOWN
Posts: 2,332
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
on those four plugs you have on the firewall to your pcm its the bottom one yellow with green stripe.

Black 2003 QC SB SLT 4x4 Offroad 5.7L HEMI, Original Owner 3.92 LSD, 260 cam, 6.1 Rods/Springs, Home Ported/Polished Heads, Psc1, 04 Map sensor and Fuel pump assembly, Oil pressure guage, Amsoil, Champs, MSD 8.5MM Full length Wires, Transgo HD w/out resistor, Superchip, 180 T-Stat, K/N 77 Series, Ceramic Flowtech headers with Y-Pipe, Stage 8 locks, Ditched the cat, O2 sensor mod, Jack Rabbit bed cover, Sprayed bed liner, Big Mouth Grill-Black, Blackend Headlights/Tails, Silverstar ultras, Ditched all chrome, Custom 10's sub enclosure, Upgraded 160 amp alt, Window tint, Relocated purge valve, Energy suspension bushings, Rear spring clamps, Rebuilt front suspension, Ditched Sway Bar, Passport 8500 Radar Detector, Ditched the baby seat- kid wasnt mine, Cigarette burn in the seat mod, Debadged, Custom Rewired/Properly Grounded.
crasher76 is offline  
#5 Old 01-15-2010, 12:09 AM
darell_n
Boost, you say!?
 
darell_n's Avatar
 
Join Date: Aug 2006
Location: Cochrane, AB
Posts: 1,304
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Regardless of how many connectors, you still have a TCM mounted on the passenger fender with the same wires as every other '03 Ram. Cut the wire there instead as it's more accessible.

Cheap. Fast. Reliable. (Pick 2)
darell_n is offline  
#6 Old 01-15-2010, 06:48 AM
TrouttDOG
Registered User
 
TrouttDOG's Avatar
 
Join Date: Feb 2009
Posts: 35
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
will this work on the 03 2500 4x4 with the hemi its a heavy duty....hope it doesn't make a diffrence mine shifts like its slips into 2nd and 3rd at wot

TrouttDOG"S DODGE
2003 2500 HEMI QC
TrouttDOG is offline  
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
03 TMR delete mod. LPGHemi 3G Dodge Ram Performance Talk 84 01-17-2010 09:18 AM
Cat Delete or Muff Delete? Sparks07CTD 3G Dodge RAM Diesel Talk 19 07-08-2007 08:49 PM
how to tmr? Jack Arse 3G Dodge Ram Performance Talk 0 03-29-2007 05:25 PM
03 Tmr ? pegasus 3G Dodge Ram Performance Talk 10 02-02-2007 07:46 PM
TMR - I know (again) MiniCwik 3G Dodge RAM - Drivetrain Talk 19 11-13-2006 08:04 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome