truck v10 performance??? viper??? - DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums
 HOME  FORUMS  GALLERY  GARAGE  TECH  CLASSIFIEDS  LINKS  MEMBER MAP  ARCHIVE  SPONSORS
INFO SITE HELP ARCADE TELL-A-FRIEND STAFF CONTACT US AUTO LOANS


DodgeTalk.com is the premier Dodge forum on the internet. Registered Users do not see the above ads.Please Register - It's Free!
Go Back   DodgeTalk : Dodge Car Forums, Dodge Truck Forums and Ram Forums > Dodge Truck, SUV and Van Forums > Truck Engine Technical Forums > 2.5L, 3.9L, 5.2L, 5.9L, V10 Tech

Closed Thread
 
Thread Tools

joshgantt
 
  Angry truck v10 performance??? viper??? - Posted: 04-23-2007, 05:34 PM
Registered User
Joined: Apr 2007
Posts: 3
Status: Offline
Post #1

ok i just bought a 1994 truck v-10 motor and want to convert everything i can to make it a viper motor? as much as i can so dose anyone know what will or will not interchange? i got this for $700 and i found a viper intake manifold so i just need some help on what i can or can not do thanks josh
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote
Sponsored Links
Advertisement
 

joshgantt
 
 Posted: 04-23-2007, 06:07 PM
Registered User
Joined: Apr 2007
Posts: 3
Status: Offline
Post #2

even if i have to rebuild the whole block i just wanna know were i stand thanks again josh
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

Dakotah18
 
 Posted: 04-23-2007, 08:33 PM
Troubleshooter
Joined: Nov 2005
Posts: 1,518
State: IL
Status: Offline
View This User's Gallery View This User's Garage
Post #3

I could be wrong, probably am wrong, but I thought the 2 V10's were the same block just built out of different material. On second thought, the could be essentially the same block but have different bolt patterns for everything. I know I'm not much help, but If I'm wrong at least we'll both learn something
__________________
To the victims and their families of the shooting at Northern Illinois University, my heart and prayers go out to you. 02-14-08 Will not be forgotten.
'08 Chevy Impala SS 5.3L - 122,000 miles, all factory options, 20% Tint rear and 45% tint front, police horn

'92 Dodge Ramcharger Canyon Sport 4x4 5.2L - 169,000 miles on body, egr and cat delete, rebuilt engine and transmission, windshield visor with marker lights and ram head with lighted eyes----sold

'95 Dakota 4X4 SLT 318 - 245,000 miles, Duals, CAI, 2 Toolboxes, amber lightbar, side mounted lights, 12V outlets in bed, 150W power inverter, fogs and secondary reverse lights, strobes, all factory options, 31" tires, drop-in bedliner, bedlined lower panels, 2nd gen rear bumper, several aftermarket mods. Planning to add more strobes and lights----sold
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

joshgantt
 
 Posted: 04-23-2007, 08:36 PM
Registered User
Joined: Apr 2007
Posts: 3
Status: Offline
Post #4

yea thats what i was thinking too. if the bolt holes on both blocks are the same than perfect, but if not than i'm SOL. i just need to know before i start ordering everything i need.
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

lebaronman
 
 Posted: 04-23-2007, 09:24 PM
Registered User
Joined: Oct 2002
Posts: 453
State: NY
Status: Offline
View This User's Gallery
Post #5

They are very few parts that are interchangable . Some people have put Viper heads on the Iron V10 but it is not a simple bolt on . The Viper motors Intake will not seal up the Iron's V10 valley pan area. The intake will also not let you use the brackets that hold your alt. and a/c compressor.Cams and Cranks will not interchange.
__________________
Later Chris
79 Lil Red Supercharged V10

89 Lebaron
2.2 Turbo 13.1 @108 1/4 mile
View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote

98QuadCabV10
 
 Posted: 04-25-2007, 08:49 PM
98QuadCabV10's Avatar
EPA's Worst Nightmare
Joined: Feb 2005
Posts: 1,664
City: Washougal, WA
State: WA
Status: Offline
View This User's Gallery View This User's Garage
View This User's Timeslip
Post #6

I think the heads are completely different. You might be able to do it but you would probably have to do a complete rebuild get new everything except for the block. The truck V10 pistons couldn't handle the rpm that the viper runs at. Might be easier to put a viper engine in it. If you do figure it out let me know.
__________________
1998 Ram Quad Cab 2500 Short Bed V10 4x4
C.A.I.
Headers.
SCT Tuner
3" SRB Lift
Fast Man TB
GM Push Rods
2" Leveling Kit
1.7 Roller Rockers
Exhaust: No cats, Flowmaster 50
Best Runs
60': 2.27
1/8th: 10.23 @ 68.56 MPH
1/4: 15.93 @ 85.7 MPH
0-60: 7.9sec

V10 Ram Club #1

Click For Info

View Public ProfileSend a private message to %1$sSend email to %1$sFind all posts by %1$sAdd %1$s to Your Buddy List Reply Reply With Quote
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Conversion and RV Manufacturer info: RAM MAN Dodge B-Series Vans 1971 - 2003 11 11-17-2009 12:38 AM
SRT-10 to Pace Daytona Truck Race RAM MAN Rumor Mill & Gossip Talk 1 02-09-2004 10:07 AM
2004 Dodge Truck Highlights RAM MAN Rumor Mill & Gossip Talk 2 08-06-2003 11:46 AM
My Viper Days Experience SUN RA KAT Dodge Viper - General Talk 13 05-08-2003 07:56 PM
Pricing Announced for 2003 Dodge Viper SRT-10 SUN RA KAT Dodge Viper - General Talk 0 07-19-2002 08:07 AM



All times are GMT -5. The time now is 02:22 AM.





Privacy Statement