DodgeTalk Forum banner
Status
Not open for further replies.

Dana 44 Cad axle seal

4K views 5 replies 3 participants last post by  The_War_Wagon 
#1 ·
I just put a Dana 44 cad axle on my 76 W100 and the driver side is leaking oil from the axle pretty good. How do you change the axle seal? I know I have to take the axle shaft out, is the seal in with the cad? Any help would be great.
 
#6 ·
My RC is going to the shop tomorrow to change the front axle seals. We changed the outer ones - FORGOT to change the inner ones, when we re-geared last year.. and it's burping out BOTH ends of the axle now. :eek:


I decided to replace the CAD at that time (the hoses were shot, and it was the factory original!), but now it's gummed up with axle grease. We're just gonna lock the axle AND the CAD, but it isn't a problem, since I've already converted the axles to manual (lock-out) hubs. :cool:




 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top