I was wondering if anyone knew how much the dealer would charge (if any) to program a key.....I have one key that is not working so cannot do it that way so was going to pick one up from ebay get cut and then have dealer program it.
I was wondering if anyone knew how much the dealer would charge (if any) to program a key.....I have one key that is not working so cannot do it that way so was going to pick one up from ebay get cut and then have dealer program it.
I heard from $65-$150(Key Included & Programming) depends were your located I have heard also! I have the two left from my 1st D and was wondering could I get them programed for my green D
You're right, I put up the directions. Whether you need 1 working key or 2 working keys depends on if your vehicle is equipped with Sentry key. With sentry - 2 keys, without - 1 key.
Note: on non-Sentry instruction, #1 (on previous page in manual) states to get in the D and close all doors.
:thatfunny not gold, but would be cool... things are always more exp in AK. gas where im at is already at 4.34 a gallon. filled up today, for 16 gal cost almost 70 bucks.
:thatfunny not gold, but would be cool... things are always more exp in AK. gas where im at is already at 4.34 a gallon. filled up today, for 16 gal cost almost 70 bucks.
you can get spare keys off eBay for under $20 shipped to you
the dealerships usually charge 1/2 to 1 hour of labor to program. The keys brand new from Dodge are $70-100 themselves. That's why you can see it easily go over $200 if you just walk in and ask for 1
I've bought eBay keys for both of my last cars. I need to do it with the D as well. I'm hoping to spend about $80-90 out the door next week.
Status
Not open for further replies.
You have insufficient privileges to reply here.
Related Threads
?
?
?
?
?
DodgeTalk Forum
4.7M posts
289.9K members
Since 2002
A forum community dedicated to all Dodge owners and enthusiasts. Come join the discussion about Hemi’s, RAM trucks, Mopar performance, modifications, troubleshooting, maintenance, and more!