DodgeTalk Forum banner
Status
Not open for further replies.

6.4 build, 545RFE tranny build and more....

438 views 7 replies 6 participants last post by  hemidup 
#1 ·
#2 ·
Are you going to put more in-depth technical information on the site?
 
#3 ·
One word to sum this up Crazy
 
#5 ·
So is it just a stroker motor?
 
#6 ·
That whole setup is so beyond sick its not even funny! :rck:

KB
 
#8 ·
The reason for the site was that so many people asked about pictures of the engine/tranny build. I figured this was the easiest way. I have hundreds more. I will probably hook up with www.midwestmopars.com forum. I can then get into more of the technical stuff on there. If you have any ideas that you can offer up, let me know. I'll do my best. Denny and I are more than willing to help you guy's out. As far as the engine, it's a custom build 392 cu in stroker with a Paxton supercharger and Snow Performance water/meth injection setup. The tranny has been built up and blueprinted with Alto/Koleen steels and clutches with a Transgo reprogramming kit. The tuning is handled with Superchips and an SMT6 and monitored with an Innovative LM3. We'll be taking the truck to Monster Mopar Weekend next week for some track times. Look me up if your there. I'll be setup right accross from Indy Cylinder Heads. Hope to meet you. ;)
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top