![]() |
|
•
•
•
•
•
•
•
•
•
•
•
•
• • • • • • • • |
![]() |
|
![]() | ![]() |
|
||||||
![]() |
|
|
Thread Tools |
![]() |
![]() |
![]() |
![]() |
Bad clunk at full turn
- Posted: 02-25-2013, 02:15 PM
|
![]() |
|
Post #1
05 quad cab 4x4 hemi...started after off roading for work a few thousand miles ago...still drives normal steering is tight and tires aren't wearing abnormally. Does it at full lock...steering wheel to the left...and especially when I'm gassing it..sometimes it's so bad it feels like something in the front end is going to snap off.
It's def coming from dr side wheel...I'm guessing something in the half shaft? I'm not too familiar with this truck set up..could use any help possible Sent from my SPH-L710 using Tapatalk 2
__________________
-05 Ram 4x4 hemi quad cab WHITE -66 mustang 5.0 crate motor, t5, 8.8 explorer rear end -72 maverick undergoing full resto |
![]() |
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
![]() |
| Sponsored Links | |
Advertisement |
|
![]() |
![]() |
![]() |
![]() |
Posted: 02-25-2013, 05:24 PM
|
![]() |
|
Post #2
Check your sway bar end links.
__________________
|
![]() |
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Posted: 02-26-2013, 05:56 PM
|
![]() |
|
Post #3
Does it do it when you brake in reverse? That's what I have going, dr side also. I can feel it through the steering wheel.
__________________
2010 1500 sport crew cab. Mango Tango, 5.7 Hemi, 33x12.5r17 Cooper STTs, 17" XD spys *Traded* 08 1500 qc big horn 5.7 hemi Bilstein 5100s, 33x12.5 cooper stt, 17" xd spy, moog upper/lower balljoints, moog inner /outer tie rods, powerslot rotors, ebc green stuff pads, 6000k hids, retrofitted projectors,180 Jet tstat, magnaflow y pipe, moroso spiral flow muffler, grounded throttle body |
![]() |
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Posted: 03-18-2013, 07:54 PM
|
![]() |
|
Post #4
|
![]() |
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Clunk and left turn binding | session606 | 3G Dodge RAM - General Talk | 0 | 11-30-2009 07:10 PM |
| I have a horrible clunk when i turn! | foxracer61 | 2G Dodge RAM - General Talk | 4 | 02-02-2009 07:21 AM |
| Noise and vibration at full turn | p01101 | 1G Dodge Durango - Drivetrain Talk | 1 | 09-13-2007 05:50 PM |
| clunk when I stop/clunk when I start(lag) | satexasdodge1 | 2G Dodge RAM - General Talk | 5 | 03-30-2006 05:44 AM |
| Popping noise when turn to full lock | hemi_power87 | 3G Dodge RAM - General Talk | 9 | 12-21-2004 01:46 PM |
![]() | ![]() |

![]() |
Privacy Statement | |