Lift Kit Review/Pics Sticky

Originally Posted by BEsRaider

ALRIGHT GUYS! I think this is completely up to date with all emails and PM's. Sorry for the delay, but life has been keeping my busy...and I haven't sat behind my computer long enough to do all of the uploads, especially for you dudes that sent me 3 or 4 phases!
Thanks again for the support, and let me know if there is anything I can do!

This is absolutely great what you have done here man!

Thanks man. I'm doing what I can. Maybe Rough Country will throw me a discount code for all of the RCX kits I am posting for them!! HAHA!

Nice thread

I think your in the wrong section, this is a 4g ram thread

But its a good lookin' truck nontheless! I do want to keep the original post as 4g's...but I can always admire a nice truck.

Awesome thread!

Originally Posted by BGRTHNURHEMI

Awesome thread!

Hey, I appreciate ya! This has been fun for me, as I get to interact with a ton of users, see some cool trucks, and all I really do is babysit. Its really more about the support of all of the guys that sent me pictures!

I'll shoot you a pm with pics/specs of my 2011 1500 next week after my 6" RCX lift and 4.56s are installed.

My transformation has gone from:

1) stock
2) 2.5/.75 TGC level on 33s
3) 2.5 level on 35s on stockers w/ 2" wheel spacer and inner fender modification
4) 2.5 level on 35s on 20x10 -24
5) and soon to be "6 inch RCX w/ Bilsteins at 1.4 on 35s on 20x10 -24

Oh sweet baby Jesus. Another one of those multi-pic dudes! haha.

Sweet thread. I thought someone was going to delete posts that were not lift pics? Either way, great going. Hopefully, I can contribute soon. I got my eye on a Kore Pre-Runner Series or the Icon Suspension System Stage 1 or 2.

Originally Posted by trooperjoe73

Sweet thread. I thought someone was going to delete posts that were not lift pics? Either way, great going. Hopefully, I can contribute soon. I got my eye on a Kore Pre-Runner Series or the Icon Suspension System Stage 1 or 2.

Posts were going to be deleted if this thread was more like the "Show off your 4WD" thread. The way I am doing it, it will allow for the chatter, and I keep maintaining the OP. Thanks for the support!

Hey guys! I do believe that this thread is up to date with the messages/emails that I have received. I want to give a huge shout out to myoung84 for helping me update this from here out, because I will not be able to edit the original post. This thread is going to continue, so feel free to keep sending me messages as normal!

Great thread. I guess since chatter is permitted, I'll let you know that I'll be leveling my '12 in a few days. I custom ordered a 1.5" kit since the Outdoorsman sits stock .6" higher than other models. I didn't want too much CV angle, causing the death wobble, so the 1.5" kit will put me at the same height as other models on a 2.1" level. I'll email a photo and any tips after install.

Just did some major editing. The first three posts will all be used for pics now rather than everything jumbled together. Please note that 2wd's are also accepted and encouraged to post.

You can either send the pics and info to BEsRaider or post within this thread. Once your pics are put into the appropriate post your original post will be deleted. As already mention, chitter chatter is welcomed!

Post 1: Regular Cabs and Quad Cabs
Post 2: Crew Cabs
Post 3: 2500/3500s

You guys are doing a great job putting this together

I THINK that this is Shots' truck... myoung84...here ya go if ya can help me out!

Shots:
This is a stock 2012 QC 1500 Outdoorsman with only a 1.5" Auto Spring Level kit. It's the same type of level as Top Gunz Custom, and Hellbent Steel. I ordered 1.5" because the Outdoorsman sits .6" higher than other models due to different struts from the factory. My current height is 38" front and 39.5" rear.

Originally Posted by BGRTHNURHEMI

I'll shoot you a pm with pics/specs of my 2011 1500 next week after my 6" RCX lift and 4.56s are installed.

My transformation has gone from:

1) stock
2) 2.5/.75 TGC level on 33s
3) 2.5 level on 35s on stockers w/ 2" wheel spacer and inner fender modification
4) 2.5 level on 35s on 20x10 -24
5) and soon to be "6 inch RCX w/ Bilsteins at 1.4 on 35s on 20x10 -24

I'm really curious to see the 35's and 20x10 on the 2.5 level...I've got wheels with the same specs, and the same level so I'm really interested to see how this looked.

Originally Posted by Whiteout08

I'm really curious to see the 35's and 20x10 on the 2.5 level...I've got wheels with the same specs, and the same level so I'm really interested to see how this looked.

Done!
Google 'WhiteKnight Dodge Ram 1500'
He is not from these boards, but he has a maxed Bilsteins setup (once settled is approx 2.5") and 20x10, -24 Fuel hostages on 35" Toyo MT's

He did have to bend a few tabs and do a bit of trimming, but if you are running AT's you will be better off as it doesn't have as aggressive of a sidewall.

do you have links? THis is the wheel and tire setup I have been looking for, and cant seem to find any anything. I feel like we had someone put Trail Grapplers on recently with just a level lift...

http://www.dodgetalk.com/forums/showthread.php?t=368197