Truck is almost done!!! (besides body and paint)
Exhaust is finished. Ran 3" Magnaflow mufflers right off the headers and have a turn down right after the muffler. I'm eventually going to run side pipes out in front of the rear tires, but this is good enough for now. Sucker is almost too darn loud. Not going to be able to sneak around anywhere
Installed a Lokar kickdown cable, and a B&M megashifter. Was my first time with both of these products, and I can say I'm impressed. Using the Lokar cable was a heck of a lot simpler than trying to mess around and get clearance for a kickdown rod off the carb, and the megashifter was the same deal. Also looks pretty cool in the truck.
Also go the rad in. Used a rad from my 97 Concorde. Had to modify the core support a good deal, but it fits. Not sure yet if it will adaquately cool the truck but it should. Running both the stock electric fans from the Concorde.
Lastly got most of the exterior back together. Had quite a bit of wiring to do to get lights back on the truck, but it's almost done. Just need to inner fenders put in (need to find a set first) and touch up a bit or wiring for water temp, egt, and the neutral safety switch and back up light switch. Should also get an oil pressure gauge to get rid of my pop bottle catch can
Pics of progress (not much to see)
rad mocked in place
Clearance (yeah right) to electric fans
upper rad hose built:
Outside of truck:
Also showed my PowerWagon some love and painted the lower rockers:
2007 Dodge Power Wagon - Inferno Red Quad Cab, G56 6-speed, KRC 210X cam, Centerforce clutch, SRT8 JGC seats, 35x12.50 Toyo MT's, Offroad lights behind the grill, Warn wireless winch remote, Carli front Diff Guard, Carli Long Travel Air Bags, On board air complete w/ train horns, homemade hidden gooseneck hitch, Homemade locker bypass
1998 Dodge 2500 Ext Cab, SB - 5.9 24V diesel, 35" Dynapro MT's on 17" 3rd gen rims. Completely rebuilt, with a few performance goodies added, and a whole lot more to come.
Old Faithful: used and abused, but keeps firing up.
2002 Dodge Ram 1500 ST 4x4 Quad Cab 4.7L Bright Silver (Totalled Dec 2/08, back on the road Feb 4/09. She ain't pretty but still a beast)
HO Cams, 12,000 lbs Winch mounted behind bumper, 4.56's, 2500 factory tow hooks, DMH E-cutout, 35x12.50 Toyo MT's, Air-Lift Ride Control bags, homemade hidden ball gooseneck hitch.
1987 Dakota RCSB (scary ride) :
413 BB truck motor (.030" over), long tube headers, 727, Quick fuel 830cfm, and a bit more to come.....
My other Vehicles:
1987 Ram W100 4x4 - mild 360
1999 Jeep TJ, 4cyl(boo), 5spd