Beltand Ac [Archive] - Dodge Talk Community Forum


Click Here to Visit The Planets Largest Dodge Enthusiast Community




PDA

View Full Version Of This Page : Beltand Ac


pickupfreak360
01-13-2006, 12:40 AM
Ok i have a 1977 Dodge ram power wagon w200 custom I'm fairly new and would like some help first

i want to get rid of my ac and i am wondering what the will take. Know i need a new belt system and heater box anyone know where i can get that ?

what is the max tire size you can fit on my truck stock?

dose anyone know if any old dodge cars have 8 lug i need a set of tires to fit?my truck in my shop once i lift it i know its sad but it wont fit with a 4 inch lift and 33 inch tires i need to find small 8 lug tires.

thank for the help

Chump
01-13-2006, 02:32 AM
What size engine? You don't need to change the heater box. You might need to get a new water pump pulley with different grooves but I cant really remember. The actual belts themselves are no problem getting. You need to look from the side and line up your pulley grooves by eye, then you will have a better idea as to what you need. Sometimes you can get by with 1 belt running to the alternator but I always run 2.

pickupfreak360
01-13-2006, 03:37 PM
ok thanks i have a 360 in the dodge and was just trying to figure out exactly what i need to do i just removed the engine and am starting the rebuild

Chump
01-13-2006, 10:17 PM
I think if you have any questions on how to configure it, partially assemble all the pullies,etc before you put the engine back in and it will be easier to see what you need. You can always take the pullies,etc off before you put the engine back in. :)

Rayven
01-16-2006, 09:13 PM
no cars ever had 8 lug rims, i have a 79 without a lift kit and i run it with 33" BFG mud terrains, where you have a 3/4 ton you should be able to fit 35" unless you have the hevy half ton wich is just a 1/2 ton pickup with 3/4 ton leaf springs

pickupfreak360
01-17-2006, 12:13 AM
dose any one know exatcly the max tire size i can run with no modifications on a 77 w200custom 3/4?


THanks