Front wheel bearings?

[Frez1812]

Is it real hard to change the front wheel bearings hub assembly? When we had my van on the lift there was a shuck in the front right wheel. I'm assuming it's my wheel bearings. Checked with autozone and they have the part for 79.00.

thanks guys.......


Any tips would be appreciated!

[sgillett]

My 1995 has bolt in wheel bearings.
Remove the wheel, caliper and rotor, loosen the big nut on the half shaft and remove the 4 bolts from behind and it comes off. The new bearing has the lug studs in it so it's a pretty easy change out. Be sure to torque all the fasteners and use loctite if needed, including the big nut on the half shaft (drive shaft) it needs a BUNCH of torque, I think it's around 180 Foot pounds but I'm at work so I can't look right now.
Good Luck
Scott