BigDogTx
08-24-2005, 11:20 AM
The light came on, they noticed bad spark pattern on cylinder #1, replaced coil, spark plug wires, air cleaner.
Now engine light back on, and running kind of sluggish....helpppppp!
ChicagoTRS
10-14-2005, 10:10 AM
What you need to do is retrieve the diagnostic codes...anytime you get a check engine light you will also get some codes.
To check codes you need to turn off the car and then cycle the ignition key three times...turn it all the way until right before you are going to start the engine and then turn it back...do this three times and then the third time leave it on and the codes should be displayed on your dash. The codes should give you a good idea of the problem.
