can anyone help me with a wiring diagram for a 1995 intrepid my gagues dont work and when i turn off my lights the door locks lock an unlock.maybe i should go deeper i had to replace the a/c evaporater and when i put it all back together thats when it all started to happen. airbag light stays on, the trans indicator does not light up, no tach, no fuel gauge, no temp gauge, i called a dealer and they said i forgot to plug something in i cant find a loose plug anywhere. everything else works fine.
carguy2
10-13-2002, 08:47 PM
Sounds like you are having a computer problem. It controls all the guages.
nowatkins
02-10-2003, 05:09 PM
The part about the lights and doors. I dont know. The problem with the gauges and lights. Maybe? Try replaceing your ignition switch. I was having the same problem. No gauges, no inst. light, no changing gears. The switch is on the left side of the steering column. You have to remove the tilt lever to get the cover off. Make sure you have a few star drivers on hand because of the screws. One more thing if you buy the switch the screws that come with it do not use those. Use the ones already in place. I bought a Haynes book from AutoZone for instructions on how to install it.
valuepak06
02-10-2003, 10:41 PM
Thanks for the insight, but I fixed the problem. It turns out that I had the computer diagonitcs plug, plugged into the traction control plug. Same plug different colors. What a du-- a-- I am.
Thanks
Roger
dropchuck
10-13-2004, 09:49 PM
I have the same problem with the guages. I have a Snap-On scanner and want to run a scan to check things out, but I can't find where to hook it up to. The Hanes book was worthless. It said it was under the hood............AHHHH..... where? I looked and found no port....HELP!
dropchuck
10-14-2004, 02:59 PM
I just got done replacing my ignition switch and guages still don't work. :VHOT: (P.S. have a set of really tiny 12 points to get screws off)Going to try to get guages from bone yard to see if that fixes it. I'll keep you posted.
dropchuck
10-15-2004, 04:22 PM
I found the port!!!!!! It's located under the driver's side dash right above the gas pedal. It's a square blue "chrysler 2" connector. I tested my system and found out it was my guage cluster was bad. Hope this helps everyone.
