Photo of the Sean Roe Supercharger

[SUN RA KAT]

http://www.roeracing.emerchantpro.com/vendorimages/roeracing//side.jpg

Delivery and installation on my Viper expected by mid-October.

Yes, I will post photos and a full report.

[scalski]

Man, Are you gona have power or what!!!
Later,
:flamer:Scott

[SUN RA KAT]

http://www.roeracing.emerchantpro.com/vendorimages/roeracing//black2.jpg

[McClane]

That looks awesome !

Can't wait to read about your experiences with the s/c !

[SUN RA KAT]

The Sean Roe site is temporarly down & photos will return as soon as it's up again.

In the meantime, here's some info from Sean Roe on his Supercharger System:

The kit, pictured below, features:
- Autorotor Twin Screw (positive displacement) Supercharger available in polished or black anodized finish. Self contained oiling system, no lines to run or holes to drill. Low drag unit does not require the crankshaft hub to be keyed.
- New CNC machined intake manifold.
- 10 high flow Bosch fuel injectors.
- New fuel rails and lines at the engine.
- Eaton bypass valve mounted to the manifold increases efficiency under part throttle loads.
- Air intake system to deliver the air from the throttle bodies to the Supercharger.
- Drive support with idler pulley.
- Longer serpentine belt.
- Stainless steel mounting hardware.
- 10 new Bosch spark plugs.
- All necessary gaskets, silicone hoses, clamps, etc for installation.
- No fuel system changes required.
- No special belt or maintenance required.
- Low boost system yields 25-30% gain at the rear wheels.
- Compatible with other types of upgrades (headers, roller rockers, etc).
- 1 year unlimited mileage warranty.
- Complete color photo instructions included for do it yourself installation. Can easily be installed in 1 day.


Priced at $6,995.00 plus S&H. No tax for sales outside of Florida.

http://vca1.viperclub.org/ubb/uploads/Sean+Roe/sides.jpg


The first run of kits began shipping last week with the remaining systems going out the first half of October. The entire first run was pre-sold.

The second run will be available in approximately mid December. We have already ordered another 50 Superchargers from Sweden for the second batch.

Here's a small picture of a black one (our website server is still down).

http://vca1.viperclub.org/ubb/uploads/Sean+Roe/Viper-SC1.jpg

[RAM MAN]

If I could only shoehorn that blown block in my truck ....

[SUN RA KAT]

It WILL fit!

[DGERAM]

yeah, but it would cost $$$$$$$$$$$$$$$$$$$$$$

[SUN RA KAT]

It can probably be done for less $$$$$$$$$$$$$$$$$$$$$$ than getting a Ram SRT-10.

[DODGEguy3]

Its not red :( it needs to be red, not chromed or black... i NEEDS to be red :(

[SUN RA KAT]

Under the hood it will be black no matter what color it is when the hood is opened. I think black looks better, but I chose polished aluminum because it will reflect engine heat instead of absorbing the heat.

I also guess that you could paint the parts any color you wanted to before installing them.

[SUN RA KAT]

Photo taken at VOI7 (Viper Only Invitational #7) in Nashville before the rain came and ended the drag racing event.

http://www.cartogra.com/rs/FCFE61F6-D0F6-11D6-B42C-0090277A760E/screen

[scalski]

Looks nice, the supercharger has more power than my car.
Later,
:flamer:Scott

[SUN RA KAT]

I just found out the Viper with the Sean Roe Supercharger DID get to run before the rain came...

10.7 seconds ET and 130 MPH


Oh-My-Gosh!!!

[SUN RA KAT]

Sean Roe brought his own Viper with his Supercharger to VOI7.

http://members.aol.com/y2kgts/roe2.jpg

[RAM MAN]

all I got to say is = you're one lucky guy

I hope we have time to get together some time next year so you can give me a ride in your blown Viper !

[SUN RA KAT]

That sounds like a Plan I'm looking forward to doing!

[DODGEguy3]

sun ra - next year if voi-8 is in las vegas will you be there? im going to be there (probably even drew) if it is in las vegas and maby we can meet up - i know its a little early for it though.

[SUN RA KAT]

Las Vegas isn't too far for me to travel. The VOI events are usually held every 18 months or so, so it probably would be in sporing of 2004.

[DODGEguy3]

can you take photos of the supercharger before its installed and after its installed - also, take lots of pics while you install it step by step, that would be really cool. what will you be doing with your current mannifold, selling it on ebay after the supercharger is installed?

[SUN RA KAT]

I plan on taking lots of photos. I'm keeping the original intake manifold, throttle bodies, etc. in case whoever buys my Viper in 30 years wants to restore it back to the original condition.

[DODGEguy3]

im going to buy it ;), your viper is my favorite viper color: yellow, although i would have to add black stripes, i have a little stripe fettish thing going on.

[SUN RA KAT]

I promise to keep it in great shape for you. All you'll need then is a gallon of black paint , a tray, and a paint roller.